Introduction: Glove cutting resistance testing machine, designed to test the strength of protective gloves and upper protection zone. Under specified load, cut the sample with a circular cutter counterclockwise rotation, in order to determine the gloves or upper anti-cutting performance. The instrument complies with standard EN388.6.2 ISO20344.6.14 Features: 1 instrument with high accuracy, test accuracy of up to 0.1 laps; 2 The main components are made of stainless steel, durable; 3 sample fixture each groove center is a red line mark, the test can be aligned with the red line on the test bench to protect the cutter from damage; 4 tungsten alloy sheet, hardness of 740HV-800HV, blade replacement simple; 5 The instrument is equipped with two clamps to facilitate the standard test and sample test operation; 6 sample cut, the cutter contact with the following conductive device and the signal line to form a loop, the instrument automatically stop; 7 large screen (LCD) shows the test results. Technical Parameters: Load weight: 5N ± 0.05N Blade size: Ø45 ± 0.5 mm, thickness 3mm Cutting stroke: 50mm Cutting speed: 10cm / s Counter: 1 ~ 99999.9 Power: AC220V ± 10% 50Hz Instrument size: 550 × 350 × 350mm (L × W × H) Instrument weight: 80kg
Introduction: Glove cutting resistance testing machine, designed to test the strength of protective gloves and upper protection zone. Under specified load, cut the sample with a circular cutter counterclockwise rotation, in order to determine the gloves or upper anti-cutting performance. The instrument complies with standard EN388.6.2 ISO20344.6.14
