Features: 1. It is specially used for stability test in pharmaceutical enterprises to determine and evaluate the expiry date of drugs. 2. Comply with relevant requirements of ICH, FDA, GMP and current pharmacopoeia. 3. Domestic and international counterparts of the lowest power consumption, can save power costs. 4. The water supply can be recycled without the need for construction of drainage facilities. 5. There is no special requirement for water and electricity, low noise and easy operation. 6. TECUMSEH (France) original fully enclosed compressor unit, dupont R404a environmental refrigerant. 7. Perfect system design, no other optional accessories, can be a complete test. Meet the technical requirements of the standards and implementation In line with national pharmacopoeia and FDA, ICH and other relevant standards in the accelerated, long-term, intermediate and high humidity test requirements; Also meet other special class infusion of 40 ℃, 20% R.H. low humidity test. Gb10586-89 wet heat test chamber technical conditions; GB/ t2423.3-93, iec 68-2-3 test Ca code: constant wet heat test method; It meets the long-term, accelerated and high-humidity test conditions and requirements of the new pharmacopoeia. USES: A long-term stable temperature and humidity environment is designed and manufactured in a scientific way. It is used for accelerating experiment, long-term experiment and high humidity experiment of drugs and new drugs in pharmaceutical enterprises. To meet the technical guidelines for stability studies of chemical drugs in the pharmacopoeia: the standards and requirements for medium - and long-term, accelerated, high-temperature and high-humidity experiments in impact tests. The equipment can be equipped with double refrigeration system to meet the requirements of high performance and longer stability test. Technical parameters: Product model; FWS150C, FWS250C, FWS500C, FWS1000C, FWS2000C Studio dimensions (depth * width * height) : 450*500*650, 450*600*900, 600*800*1000, 1000*1000, 1200*1100*1500 Product material: inner liner material: imported stainless steel plate; Material of outer box: the surface of cold rolled steel plate is sprayed with static electricity Temperature range: 0 ℃ ~ 65 ℃ Temperature fluctuation degree, plus or minus 0.5 ℃ Temperature uniformity: 2.0 ℃ or less Humidity range: 20% ~ 95%R.H. Humidity deviation: 5%R.H. Refrigeration: to ensure the continuous operation of the test chamber, the refrigeration system is equipped with TECUMSEH air-cooled compressor Control system: microcomputer intelligent temperature and humidity controller LCD display Power supply: AC220V /380V 50HZ Standard configuration: adjustable sample rack and 2 shelves; Independent over temperature protection; Overcurrent, short circuit and leakage protection; Vacuum coated anti-frost glass and interior lighting; microprinter 3Q verification: provide equipment GMP verification scheme (IQ, OQ, PQ) conforming to international standards, and cooperate with the buyer to complete equipment acceptance verification.
Features: 1. It is specially used for stability test in pharmaceutical enterprises to determine and evaluate the expiry date of drugs. 2. Comply with relevant requirements of ICH, FDA, GMP and current pharmacopoeia. 3. Domestic and international counterparts of the lowest power consumption, can save power costs. 4. The water supply can be recycled without the need for construction of drainage facilities. 5. There is no special requirement for water and electricity, low noise and easy operation. 6. TECUMSEH (France) original fully enclosed compressor unit, dupont R404a environmental refrigerant. 7. Perfect system design, no other optional accessories, can be a complete test. Meet the technical requirements of the standards and implementation In line with national pharmacopoeia and FDA, ICH and other relevant standards in the accelerated, long-term, intermediate and high humidity test requirements; Also meet other special class infusion of 40 ℃, 20% R.H. low humidity test. Gb10586-89 wet heat test chamber technical conditions; GB/ t2423.3-93, iec 68-2-3 test Ca code: constant wet heat test method; It meets the long-term, accelerated and high-humidity test conditions and requirements of the new pharmacopoeia.
