FT-35S portable intelligent dewpoint meter Introduction:
FT35S dewpoint meter is mainly applied to the detection of dry moisture micro-moisture, the measured gases are: H2, SF6, N2, O2, Ar2, CO2, compressed air and other gases moisture measurement, the probe can prevent condensation and oil and gas pollution Automatic calibration procedures to ensure long-term stability of the instrument. Widely used in electric power, chemical, aviation, metallurgy, medicine, food and other industries.
The FT35S dewpoint meter is one of the most technologically advanced and powerful dewpoint measuring instruments available at home and abroad. The dew point transmitter provided by VAISALA constitutes the core measurement unit of the entire system and condenses many recent dew point measurements Results and patented technology, mainly applied to the detection of dry moisture micro-moisture, the measured gases are: H2, SF6, N2, O2, Ar2, CO2, compressed air and other gases moisture measurement, the probe can prevent condensation and oil and gas Pollution. Automatic calibration procedure to ensure long-term stability of the instrument. Technically overcome the adverse factors of almost all field measurements. It reflects from the core to the appearance of advanced technology and advanced design, widely used in electricity, chemicals, aviation, metallurgy, medicine, food and other industries. Features:
1, true color touch screen display
2. Dew point ºC (Td), PPm value, relative humidity% RH, system temperature ºC (T), system time, and meter power
3, real-time measurement data storage and measurement data printing
4, bilingual interface, simple operation, easy to carry
5, zero automatic calibration
6, anti-pollution, anti-interference
7, good repeatability, fast response, high sensitivity, good stability Technical Parameters:
Measuring range: -80 ... +20 ℃
-60 ... +60 ° C
Dew point accuracy: less than 1 ℃
Probe: DMT242
Power supply: internal battery-powered
Probe protection: stainless steel sintered filter
Response time: 63% [90%]
Gas temperature: 20 ℃
Flow rate: 1 L / min
Pressure: 1bar
+ 60 → -20 ° C: Td 5s [45s]
-20 → -60 ° C: Td 10s [240s]
Operating Environment: Temperature: -20 ... +60 ° C Relative Humidity: 0 ... 100% RH
Pressure: 0 ... 20bar Sample flow rate: No effect
Output: Rs232 serial port
Charging time: more than 8 hours (with automatic charging protection)
FT35S dew point meter is mainly used for dry gas micro-water detection. The measured gases are: H2, SF6, N2, O2, Ar2, CO2, compressed air and other gases. The probe can prevent condensation and oil and gas pollution. The automatic calibration procedure ensures long-term stability of the instrument. It is widely used in electric power, chemical, aviation, metallurgy, medicine, food and other industries.