Introduction: FT-102B Powder Flow and Density Meter R & D and production by ROOKO, Ruike company with high-precision automatic control technology; can test the powder, powder and particle mobility, bulk density, bulk density, bulk density and bulk density parameters ; When testing the liquidity, automatically open the control valve, automatic timing and flow End automatically stop timing; when the powder and particle density testing, no need to buy another weighing balance, automatic weighing and recording test data from the LCD display and automatic Calculate the density value; Automatically through advanced measurement and control technology to reduce the traditional manual jamming caused by the test error and stopwatch timing error; and with a variety of specifications can be converted funnel to meet the requirements of different density test on the funnel, powder character analysis and Product quality control, the ratio has improved very well to help companies reduce production costs. Positioning structure to ensure the accuracy of test results. This product is widely used in the production, quality inspection, research institutes and tertiary laboratories on the analysis and measurement of the use of materials. FT-102B powder flow and density meter to meet the national standard, European and American standard test specifications for chemical, petroleum, pharmaceutical, pharmaceutical, paint, battery materials, ceramics, non-metallic powder materials, metal oxide powder, molecular materials, powder metallurgy , Plastic, building materials, soil, dyes, abrasives, food additives, catalysts and other related industries working principle: The powder flowability and compressibility can be measured by Hausner Ratio (tap density / bulk density) and compressibility index (tap density - bulk density / bulk density x 100). For free-flowing powders, the interparticle interactions are weak, so the unbuffer density is close to the tap density. For poorly flowing powders, the result is exactly the opposite. It is in line with the Hausner Ratio Hausnaby closer to 1, the better the law of liquidity. Usually poor liquidity powder, the ratio is greater than 1.25, the instrument with the FT-100A / FT-100B / FT-100E / FT-100CA tap density test data can be obtained Hausner Ratio Hausdorff and compressibility index. Technical Parameters 1. Funnel: A cylindrical measuring cylinder with multiple funnels. The funnel is made of stainless steel and has sufficient wall thickness, hardness and smoothness to prevent deformation and excessive wear. 2. Convertible funnel diameter mm: 2.5; 4.0; 5.0; 6.0; 7.0; 8.0; 9.0; (optional according to user needs) 3. Time Range: 0-99999S arbitrarily set 4 weighing range: 0-2000g; precision 0.01g Funnel volume: 200ml 6. Receive container volume: 25ml, 100ml, 200ml, 250ml, 500ml (optional according to user needs) 7. Instrument components: the control box from the electrical part and the test part, automatically open the discharge port timing. After the sample flow out stop timing. 8. Power: 220V ± 10% ambient temperature use
Introduction: FT-102B Powder Flow and Density Meter R & D and production by ROOKO, Ruike company with high-precision automatic control technology; can test the powder, powder and particle mobility, bulk density, bulk density, bulk density and bulk density parameters ; When testing the liquidity, automatically open the control valve, automatic timing and flow End automatically stop timing; when the powder and particle density testing, no need to buy another weighing balance, automatic weighing and recording test data from the LCD display and automatic Calculate the density value; Automatically through advanced measurement and control technology to reduce the traditional manual jamming caused by the test error and stopwatch timing error; and with a variety of specifications can be converted funnel to meet the requirements of different density test on the funnel, powder character analysis and Product quality control, the ratio has improved very well to help companies reduce production costs. Positioning structure to ensure the accuracy of test results. This product is widely used in the production, quality inspection, research institutes and tertiary laboratories on the analysis and measurement of the use of materials. FT-102B powder flow and density meter to meet the national standard, European and American standard test specifications for chemical, petroleum, pharmaceutical, pharmaceutical, paint, battery materials, ceramics, non-metallic powder materials, metal oxide powder, molecular materials, powder metallurgy , Plastic, building materials, soil, dyes, abrasives, food additives, catalysts and other related industries
