FT-100F Graphite Anode Material Compaction Density Meter
Introduction: Graphite anode material compaction density meter is mainly used for powder and particle compaction density testing. During the compression process of graphite anode material compaction density meter, as the powder moves and deforms, larger gaps are filled. The contact area between particles increases, which makes the attraction between atoms and the mechanical wedging effect between particles increase. The graphite negative electrode material compacts the densitometer to form a compact with a certain density and strength. This instrument uses hydraulic pressure. The test stroke can be adjusted, and the test mold part can be equipped. It can be made according to the customer. The compaction density is composed of the control part, the pressure test part and the mold provided by the test sample. The instrument automatically pressurizes during the test process, when the pressure reaches Preset value, automatically start the timing function, after reaching the preset pressurization time, stop timing, and automatically cancel the pressure and leave. Rugged and durable structure, and equipped with limit protection function Technical Parameters: Digital height measuring ruler: 0-12mm; small reading 0.01mm. Diameter of die: 12.8mm, accuracy error of 0.02mm. Height: 25mm Pressure range: 0-5 tons can be adjusted arbitrarily, accuracy ±1.5% Time: 0-999s arbitrarily set. Accuracy 0.01s Density: 0.0000-999.9999g/ml is automatically calculated. Measurement mode: automatic and manual mode. Display: 7-inch touch screen display. Delta/Mitsubishi PLC controller. Hydraulic system: Work station pressurization, constant pressure time can be set arbitrarily Demoulding: automatic or manual operation mode. Working environment: working temperature: 10℃-30℃, humidity: ≤65%RH Input: AC 220V±10%, 50Hz Dimensions: length 600 width 400 height 1100mm
Introduction: Graphite anode material compaction density meter is mainly used for powder and particle compaction density testing. During the compression process of graphite anode material compaction density meter, as the powder moves and deforms, larger gaps are filled. The contact area between particles increases, which makes the attraction between atoms and the mechanical wedging effect between particles increase. The graphite negative electrode material compacts the densitometer to form a compact with a certain density and strength. This instrument uses hydraulic pressure. The test stroke can be adjusted, and the test mold part can be equipped. It can be made according to the customer. The compaction density is composed of the control part, the pressure test part and the mold provided by the test sample. The instrument automatically pressurizes during the test process, when the pressure reaches Preset value, automatically start the timing function, after reaching the preset pressurization time, stop timing, and automatically cancel the pressure and leave. Rugged and durable structure, and equipped with limit protection function
