Introduction: The salt spray tester is for the surface treatment of various materials, including coating, electroplating, inorganic and organic membranes, anodic treatment, anti-rust oil and other anti-corrosion treatment, and testing the corrosion resistance of the products. Technical Parameters: 1. Power supply: (1) 220V (2) Single phase 1KW (3) 50/60HZ 2. Material: (A) The laboratory uses P.V.C polyvinyl chloride plates (made in Taiwan), which is resistant to acids and alkalis and is easy to clean. (B) Acrylic plates (imported plexiglass) are used for the sealing lid of the laboratory, and the thickness is 5mm. (C) The reagent bottle supplemented with a hidden water level meter is easy to clean and not easily broken. (D) Saturated air barrel adopts SUS#304 stainless steel high pressure barrel for best insulation effect (circular). (E) The tester's cover frame adopts a plane indexing frame, which can adjust the angle arbitrarily. The fog on all sides and fog are completely consistent. The number of test tablets is large. 3. According to CNS JIS ASTM GB2423.19 specifications, settable thermostatic control (A) Salt spray test: NSS, ACSS Laboratory: 35°C ± 1°C, saturated air barrel: 47°C±1°C (B) Corrosion resistance test: CASS (copper acetate) Laboratory: 50°C ± 1°C, 2 saturated air barrels: 63°C ± 1°C 4. Air Supply System: Two-stage adjustment (coarse/fine) with 1Kg/cm2 air pressure (A) The first paragraph is a rough adjustment of 2-2.5Kg/cm2, and the second paragraph is a precision adjustment of 1Kg/cm2. (B) Configurable switchover connectors designed for SO2 during test. 5. Spray method: (A) The use of the Bernoulli principle to extract salt water and then atomize, with a uniform degree of atomization and no obstructive crystallization, ensures the standard for continuous testing. (B) Nozzle: Made of special glass nozzle, the spray volume can be adjusted and the spray angle can be adjusted. (C) Spray volume: Adjustable 1 to 2 ml (80 cm2/hr) (16-hour average). 6. Heating device: Direct heating method is used to quickly reduce the standby time by increasing the heating speed. When the temperature reaches, it will automatically switch ON/OFF, so that the temperature will be accurate and the power consumption will be less (the electric heating tube is a titanium alloy product). 7. Control system: (A) Laboratory temperature controller for digital microcomputer products 0-99.9 °C, liquid crystal digital display with PID automatic calculation, control error ± 0.3 °C (YANG MING6802) 1 only. (B) Saturated drum air temperature controller 0~99.9°C, liquid crystal digital display with PID auto-calculation control error ± 0.3°C (YANG MING6802) 1 pcs. (C) Heating tank liquid expansion safety temperature controller 30 to 110°C (Italy) 1 pc. (D) Saturated air barrel liquid expansion safety temperature controller 30~110°C (Italy) 1 pc. (E) Digital display time controller 9.9s~9990hr (Taiwan spectral resistance) 1. (F) Time accumulator 0 ~ 9999hr (Taiwan Anliang) 1. (G) Rocker-type lighting button switch, can be continuously deducted 20,000 times. (H) Models 60 and 90 are manual flips. Models 120, 160, and 200 are pneumatic cylinders that open and close automatically. (J) Pressure gauge (Taiwan B brand). (K) Solid state relays (YANG MING). (L) Solenoid valve (KSD). (M) Pressure regulator valve (YIHUA). (N) Relay (Omron). 8. Water system: Automatic water replenishment system is used to automatically replenish the water level when it is too low. 9. Safety protection device: (A) Automatically shut off the power supply when the water level is low. (B) When the temperature is over temperature, the power supply device is automatically shut off. (C) Attach a safety warning light device.
Introduction: The salt spray tester is for the surface treatment of various materials, including coating, electroplating, inorganic and organic membranes, anodic treatment, anti-rust oil and other anti-corrosion treatment, and testing the corrosion resistance of the products.
