Introduction: It is a new material testing machine combining electronic technology and mechanical transmission. It has wide and accurate loading speed and force measuring range, and has high precision and sensitivity for the measurement and control of load, deformation and displacement. This series of models adopts single Space structure, test space in the lower space, mainly applicable to the test of metal and non-metal materials with a test load less than 1kN, with stress, strain, displacement control methods, can find the maximum force, tensile strength, bending strength, compressive strength, elasticity Modulus, elongation at break, yield strength and other parameters. This machine is suitable for rubber, tire, hose, tape, shoe sole, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum plastic pipe, composite materials, waterproof material, fiber, textile, wire and cable, paper, gold Testing, analysis of tensile, compression, tearing, peeling (at 90 and 180 degrees) mechanical properties such as foils, tapes, threads, springs, wood, medical packaging materials, and adhesive tapes. Features: 1. The servo motor is used to drive the beam to move up and down through the transmission mechanism to achieve the test loading process. 2. The entire control system has a very high cost performance and high reliability. 3. Using the microcomputer to control the whole test process, the load value, displacement value, deformation value, test speed and test curve are dynamically displayed in real time. 4. The data processing analysis using the microcomputer, the test results can be automatically saved, the test curve can be re-drawn after the end of the test, through the curve traverse to reproduce the test process, or curve comparison, curve amplification. 5. The test software under the Chinese-language Windows platform has strong data and graphics processing capabilities. It can instantly print a complete test report and test curve. 6. With perfect limit protection, overload protection, emergency stop and other security protection. Technical Parameters: Model: FR-108C Maximum load: 50N, 100N, 200N, 500N, 1000N, Accuracy grade: 0.5 Effective measuring range: 0.4% to 100% Force measurement accuracy: Within ±0.5% of indication Test machine resolution: Maximum load 1/200000, internal and external without division, and the entire resolution is unchanged Load cell: Basic configuration: Pull and pressure sensor (maximum load) Extended configuration: multiple sensors can be added Effective stretching space: 400, 500mm (can be heightened according to customer requirements) Test speed range: 0.001 ~ 500mm/min Displacement measurement accuracy: Within ±0.2% of indication Test bench safety device: Electronic limit protection Test bench lifting device: Jog Test bench return function: Manual or automatic selection, automatic or manual return to the initial test position at the highest speed after the end of the test Overload protection: Over 10% of maximum load, automatic machine protection Fixture configuration: A set of tensile fixtures Host size: 450×550×1400mmm (length*width*height) Motor: Servo motor + driver Power supply: 220V, 50HZ Power: 0.4KW (standard different power motors according to different power requirements) Weight of host: (approx.) 35Kg
Introduction: It is a new material testing machine combining electronic technology and mechanical transmission. It has wide and accurate loading speed and force measuring range, and has high precision and sensitivity for the measurement and control of load, deformation and displacement. This series of models adopts single Space structure, test space in the lower space, mainly applicable to the test of metal and non-metal materials with a test load less than 1kN, with stress, strain, displacement control methods, can find the maximum force, tensile strength, bending strength, compressive strength, elasticity Modulus, elongation at break, yield strength and other parameters. This machine is suitable for rubber, tire, hose, tape, shoe sole, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum plastic pipe, composite materials, waterproof material, fiber, textile, wire and cable, paper, gold Testing, analysis of tensile, compression, tearing, peeling (at 90 and 180 degrees) mechanical properties such as foils, tapes, threads, springs, wood, medical packaging materials, and adhesive tapes.
