Introduction: FR-108 tensile tensile testing machine is a new material testing machine combining electronic technology and mechanical transmission. It has wide and accurate loading speed and measuring range, and has high precision for measurement and control of load, deformation and displacement. Sensitivity, this series adopts single space structure and the test space is in the lower space. It is mainly suitable for testing metal and non-metal materials with test load less than 1kN. It has stress, strain and displacement control methods, which can be obtained, tensile index and resistance. Tensile strength, tensile energy absorption index maximum force, tensile energy absorption, tensile strength, flexural strength, compressive strength, elastic modulus, elongation at break, yield strength, peeling (90 degrees and 180 degrees can be) and other parameters. This machine is suitable for paper, rubber, tire, hose, tape, sole, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum plastic pipe, composite material, waterproof material, fiber, textile, wire and cable, paper , gold foil, tape, thread, spring, wood, medical packaging materials, tape, etc. stretch, compress, tear, peel (90 degrees and 180 degrees can be) tensile index, tensile strength, tensile energy absorption Index maximum force, tensile energy absorption, and other mechanical properties testing and analysis. In accordance with ISO1924/2-1985 "Determination of tensile strength of paper and paperboard - constant speed stretching method" and QB/T1670-92 "micro-controlled electronic tensile strength testing machine", the relevant provisions are designed and manufactured in accordance with the relevant specifications of GB17200. Performance indicators in line with GB/T2790 (adhesive 180 ° peel strength test), GB / T2791 (adhesive T peel strength test), GB2792 (pressure sensitive adhesive tape 180 ° peel strength measurement), GB4850 (low speed unwinding strength test), GB7754 (Shear strength test), GB8808 (composite film peel strength test), ZBY28004 (heat seal strength test), GB13022 (film tensile test), GB7753 (pressure sensitive adhesive tape tensile test) and ASTM D3330 test method requirements . Features: 1. It adopts Taiwan AC variable frequency motor drive to drive the beam up and down through the transmission mechanism to realize the test loading process. 2. The entire control system is highly cost-effective and highly reliable. 3. The whole test process is controlled by microcomputer, and the load value, displacement value, deformation value, test speed and test curve are dynamically displayed in real time. 4. The data processing analysis is carried out by using a microcomputer, and the test results can be automatically saved. After the test, the test curve can be recalled, and the test process can be repeated by curve traversal, or the curve comparison and curve amplification can be performed. 5. The test software under the Chinese-wide Windows platform has strong data and graphics processing functions, which can print out complete test reports and test curves in real time. 6. It has perfect protection functions such as limit protection, overload protection and emergency stop. Technical Parameters: Maximum load: 10N, 50N, 100N, 200N, 500N, 1000N, Accuracy level: 1 / 0.5 Effective force range: 0.2%~100%/0.4%~100% Force measurement accuracy: within ±1% of the indicated value or within ±0.5% of the indicated value Test machine resolution: The maximum load is 1/200000, the internal and external are not divided, and the resolution is constant. Load sensor: Basic configuration: pull and pressure sensor (maximum load) Extended configuration: multiple sensors can be added Effective stretching space: 400, 500mm (can be increased according to customer requirements) Test speed range: 0.001 ~ 500mm / min Displacement measurement accuracy: within ±0.5% of the indicated value / within ±0.2% of the indicated value Test stand safety device: electronic limit protection Test bench lifting device: fast/slow two speed automatic control, can be jogged Test stand return function: Manual or automatic two options, automatic or manual return to the test initial position at the highest speed after the test is over Overload protection: Over 10% of maximum load, automatic machine protection Fixture configuration: set of stretching fixture Host size: 450 × 550 × 1400mmm (length * width * height) Motor: Panasonic servo motor + driver + high precision ball screw Power supply: 220V, 50HZ Power: 0.4KW (standard power motors are standard according to different force requirements) Host weight: (about) 75Kg
Introduction: FR-108 tensile tensile testing machine is a new material testing machine combining electronic technology and mechanical transmission. It has wide and accurate loading speed and measuring range, and has high precision for measurement and control of load, deformation and displacement. Sensitivity, this series adopts single space structure and the test space is in the lower space. It is mainly suitable for testing metal and non-metal materials with test load less than 1kN. It has stress, strain and displacement control methods, which can be obtained, tensile index and resistance. Tensile strength, tensile energy absorption index maximum force, tensile energy absorption, tensile strength, flexural strength, compressive strength, elastic modulus, elongation at break, yield strength, peeling (90 degrees and 180 degrees can be) and other parameters. This machine is suitable for paper, rubber, tire, hose, tape, sole, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum plastic pipe, composite material, waterproof material, fiber, textile, wire and cable, paper , gold foil, tape, thread, spring, wood, medical packaging materials, tape, etc. stretch, compress, tear, peel (90 degrees and 180 degrees can be) tensile index, tensile strength, tensile energy absorption Index maximum force, tensile energy absorption, and other mechanical properties testing and analysis. In accordance with ISO1924/2-1985 "Determination of tensile strength of paper and paperboard - constant speed stretching method" and QB/T1670-92 "micro-controlled electronic tensile strength testing machine", the relevant provisions are designed and manufactured in accordance with the relevant specifications of GB17200. Performance indicators in line with GB/T2790 (adhesive 180 ° peel strength test), GB / T2791 (adhesive T peel strength test), GB2792 (pressure sensitive adhesive tape 180 ° peel strength measurement), GB4850 (low speed unwinding strength test), GB7754 (Shear strength test), GB8808 (composite film peel strength test), ZBY28004 (heat seal strength test), GB13022 (film tensile test), GB7753 (pressure sensitive adhesive tape tensile test) and ASTM D3330 test method requirements .
