Introduction: The tester is mainly used to test the tensile force of a polymer material, especially polyethylene and other materials, at a specific temperature or solution, and the fracture time of the sample. It is also suitable for testing of pipe drawing performance. The aircraft performance is stable and exported to European and American markets. Meet the standards: GB/T 15820, GB/T11546, ISO 16770, ISO 899, ISO 3501 Test method: 1 tensile creep test 2 full-notch tensile creep test 3 pull test Features: 1. Six units can be independently tested, electronically loaded, easy to operate, accurate and reliable; 2. Independent elastic support structure, no interference between units, and world-leading technology level; 3, automatic diagnosis and protection functions, long-term stable and reliable; 4. Chinese and English PC control software can realize the storage and archiving of test data, automatically calculate the destruction time under specific pressure, and draw displacement-time, force-time, stress-disruption time curves; 5, the test environment: a constant temperature water bath. Technical Parameters: Article number: FNCT-2026 Sample size: 100mm×10mm×10mm, 100mm×10mm×4mm, 90mm×6mm×6mm Effective constant force range: 20N～5000N Force value accuracy: nominal value ±1% (with self-calibration function) Test Station: 6 Creep displacement measurement range: 0～200mm Displacement measurement resolution: 0.027mm (accurate measuring device can be provided according to user requirements) Temperature control range: Room temperature ~ 95 °C or 23 °C ~ 95 °C (with refrigeration equipment required) Temperature Accuracy: ±0.5°C Power supply: 380 (1-15%) VAC to 380 (1+10%) VAC 50Hz 30kVA (three-phase five-wire) Appearance size (length × width × height): (1620 × 850 × 1750) mm
Introduction: The tester is mainly used to test the tensile force of a polymer material, especially polyethylene and other materials, at a specific temperature or solution, and the fracture time of the sample. It is also suitable for testing of pipe drawing performance. The aircraft performance is stable and exported to European and American markets. Meet the standards: GB/T 15820, GB/T11546, ISO 16770, ISO 899, ISO 3501 Test method: 1 tensile creep test 2 full-notch tensile creep test 3 pull test
