FLY-1 Air volume meter Introduction
The FLY-1 air volume meter adopts the principle of pitot tube, which performs multi-point and multiple-time automatic detection on wind pressure, and produces average air volume (m3/h) with correct, fast and simple features. It is widely used in HVAC and purification technology. The industry will directly measure the air volume of the tuyere and the pipeline, so as to concentrate on the comprehensive management of the air volume of the tuyere. After the values measured for each tuyere in the clean room are accumulated, the number of air changes can be obtained by dividing the volume of the clean room.
According to the advanced technology of similar foreign products, each FLY-1 wind meter is manufactured through a strict orifice type standard wind tunnel device for multi-point air volume correction, which provides a reliable guarantee for users to directly measure the air volume. Technical parameters
1, the basic function: LCD display, with a print interface, built-in battery can work for up to 30 hours, and no data loss (4H) after power off.
2, measurement range: 150 ~ 3500m3 / h (bin)
3. Relative error: full scale ± 5% F.S
4, own resistance: ≤ 5Pa
5, automatically store 1000 measurements
6, temperature: 5 ~ 35 ° C
7, relative humidity: 10% ~ 75% RH
8, windshield: 570 × 570 (mm) 830 × 830 (mm)
Introduction
The FLY-1 air volume meter adopts the principle of pitot tube, which performs multi-point and multiple-time automatic detection on wind pressure, and produces average air volume (m3/h) with correct, fast and simple features. It is widely used in HVAC and purification technology. The industry will directly measure the air volume of the tuyere and the pipeline, so as to concentrate on the comprehensive management of the air volume of the tuyere. After the values measured for each tuyere in the clean room are accumulated, the number of air changes can be obtained by dividing the volume of the clean room.
According to the advanced technology of similar foreign products, each FLY-1 wind meter is manufactured through a strict orifice type standard wind tunnel device for multi-point air volume correction, which provides a reliable guarantee for users to directly measure the air volume.
