Features: 1.Advanced membrane processing technology and accessories from the United States can be adapted to different municipal tap water in China; 2. Unique source water clean pretreatment Wtr Res-Clean system can prolong the service life of consumables and ensure the normal operation of the instrument for a long time; 3. Open the machine before the water automatically rinse, automatic mode switch, effectively extend the life of the RO membrane; 4. At the same time produce two kinds of water: pure water, ultra-pure water, to meet your various experimental requirements; 5. Ultra-pure water resistivity detection range: 0-18.2MΩ.cm; 6. With water inlet low pressure protection, water tank full automatic shutdown, built-in high pressure protection device automatic pressure relief and other protection devices; 7. Intelligent liquid crystal control system: a variety of status display, water, water, water, washing equipment operation status at a glance; 8. All piping, joints, and water containers used in the system are certified by the National Health Foundation (NSF) to ensure their sanitary quality; 9. Configure 3.2G vacuum pressure tank; 10. The company has provided EU CE certification and ISO9001-2008 international quality management system certification; 11. The equipment complies with (National Laboratory Water Standard GB/T6682-2008), Electronic Grade Ultrapure Water China National Standard (GB/T11446.1-1997), and American Pharmaceutical Grade Water (CAP, ASTM, NCCLS) Standard; Technical Parameters: Product model number: FBC(5-15)01/02 Working conditions: Influent water: Municipal water source Water pressure: 0.15 Mpa-0.5Mpa Inlet temperature: 5-40°C Conductivity (μS/cm): ≤0.067 Resistivity (MΩNaN): ≥15 TOC(ppb): ≤10 Endotoxin (EU/ml): — Particulate matter (0.22μm): <1/ml Bacteria (CFU/ml): ≤1 Water withdrawal rate (L/min): 1-2 Water flow rate (L/H): 5-15 Soluble silicon SiO2 (mg/L): <0.01 Absorbance (254nm 2.5px path length): <0.001 Overall Dimensions (mm): 400×405×570 (Length×Width×Height) Weight: 30kg
Features: 1.Advanced membrane processing technology and accessories from the United States can be adapted to different municipal tap water in China; 2. Unique source water clean pretreatment Wtr Res-Clean system can prolong the service life of consumables and ensure the normal operation of the instrument for a long time; 3. Open the machine before the water automatically rinse, automatic mode switch, effectively extend the life of the RO membrane; 4. At the same time produce two kinds of water: pure water, ultra-pure water, to meet your various experimental requirements; 5. Ultra-pure water resistivity detection range: 0-18.2MΩ.cm; 6. With water inlet low pressure protection, water tank full automatic shutdown, built-in high pressure protection device automatic pressure relief and other protection devices; 7. Intelligent liquid crystal control system: a variety of status display, water, water, water, washing equipment operation status at a glance; 8. All piping, joints, and water containers used in the system are certified by the National Health Foundation (NSF) to ensure their sanitary quality; 9. Configure 3.2G vacuum pressure tank; 10. The company has provided EU CE certification and ISO9001-2008 international quality management system certification; 11. The equipment complies with (National Laboratory Water Standard GB/T6682-2008), Electronic Grade Ultrapure Water China National Standard (GB/T11446.1-1997), and American Pharmaceutical Grade Water (CAP, ASTM, NCCLS) Standard;
