FL200S Automatic Glassware Washer Features: 1. 7.1-inch LCD touch screen displays various programs, operating phases, temperatures, and machine faults. 2. One-button operation, simple and convenient; 8 custom programs, 8 can change the stored program group. 3. Equipped with two peristaltic pumps, control the amount of detergent added (peristaltic pump additive capacity 360ML/MIN). 4. With imported level control sensor to prevent the lack of water and cleaning agent in the cleaning tank. 5. Standard two PT100 temperature sensors provide water heating and cabin temperature display respectively. 6. Automatic fault diagnosis program, buzzer alarm automatically, the instrument will display the fault message when the fault occurs, prompt the discovery of the problem location and convenient for engineers to provide maintenance; instrument also prompts warning information, prompts the user to deal with in time. 7. Provide 93°C thermal disinfection in accordance with the international standard EN ISO 15883-1/2. 8. Can connect cold water, hot water or deionized water and other water sources, the equipment is double inlet, connected cold water, hot water or deionized water, according to the program design from different sources of water, speed up the cleaning speed, save energy. 9. Steam condensers are standard on both sides of the cabin to prevent indoor exhaust air from polluting the indoor air. 10.External use of 304 stainless steel wire drawing board, beautiful, wear-resistant, corrosion-resistant, cabin using AISI 316L stainless steel seamless welding manufacturing, corrosion-resistant stainless steel body fillet and ramp base without welding design, no dead corner to avoid dirt residue, And bacteria are generated. 11. Standard three-layer stainless steel filter to effectively trap dirt and extend pump life. The cleaning cabin filter is equipped with a pulling structure for user's cleaning. 12. Double insulated doors can reduce heat loss and electricity consumption, low noise design, noise is maintained below 45DB. 13. Standard HEPA filter to clean dry air. 14. The unique ESL circuit control technology, forced open the door in the equipment operation phase, the equipment power off in time, stop running. 15. Touch screen operation, optional USB port, can insert the U disk to record the control parameters in real time during the cleaning process, and can export the text format to the computer to facilitate the laboratory record of the cleaning process. 16. Drawer cleaner plus kit design, safe and convenient, user-friendly replacement. 17.PC remote connection control technology, remotely modify the cleaning parameters to achieve the cleaning isolation of dangerous goods in the laboratory. 18. The door adopts double transparent tempered glass, which is beautiful and convenient, and it is convenient for users to observe the cleaning situation in the cabin in real time. 19. optional print module, after cleaning is completed, automatically print each step of cleaning data. 20. Can be placed two wash baskets, the upper washable vessel can reach 170mm, when the two layers are placed at the same time, the height of the lower vessel can reach 265mm, when the lower layer is cleaned separately, the vessel can reach 470mm. Technical Parameters: Cleaning cabin size: 560X530X653 Cleaning cabin volume: 206L Cleaning space: 193L Power supply: 220V/50Hz Rated total power: 5KW Maximum noise: 45DB Working environment: 5°C-- 40°C Circulating pump power: 0.75KW Circulating pump flow: 430L/MIN Water heating power: 4KW Drying fan power: 1.1KW Drying heating power: 2.4KW Peristaltic pump dosage: 360ML/MIN |