FE-201 oxide scale detector Introduction
FE-201 scale nondestructive tester is a special power plant oxide test instrument developed by the company. The instrument is designed with a patented test probe and combined with a universal flux meter. On the one hand, it can quickly and effectively detect the internal scale of the stainless steel tube of the power plant boiler, and eliminate the excessive scale of the stainless steel tube and cause the tube to burst; on the other hand, it can also pass the detection of the internal scale of the stainless steel tube to the heating surface of the stainless steel tube of the boiler. The overall oxidative corrosion state provides effective data support to help achieve a safe assessment of the boiler.
This measuring instrument is suitable for the measurement of laminated rust in non-magnetic stainless steel tubes. It is equipped with a rechargeable battery inside. It does not require power supply during testing. It is suitable for field work. It can be used for 4 hours with a saturated charge. Technical Parameters
Power supply: AC 220V/0.5A;
Test range: 20.00mWb with peak hold function;
Test DC magnetic field accuracy is better than: 1.0% (corresponding to full scale per gear);
Minimum resolution of magnetic field: 10uWb;
Volume: 250mm × 180mm × 100mm;
Weight: 1.2kg;
Operating environment: 0 ° C to +50 ° C, humidity: 35 ~ 80%;
Introduction
FE-201 scale nondestructive tester is a special power plant oxide test instrument developed by the company. The instrument is designed with a patented test probe and combined with a universal flux meter. On the one hand, it can quickly and effectively detect the internal scale of the stainless steel tube of the power plant boiler, and eliminate the excessive scale of the stainless steel tube and cause the tube to burst; on the other hand, it can also pass the detection of the internal scale of the stainless steel tube to the heating surface of the stainless steel tube of the boiler. The overall oxidative corrosion state provides effective data support to help achieve a safe assessment of the boiler.
This measuring instrument is suitable for the measurement of laminated rust in non-magnetic stainless steel tubes. It is equipped with a rechargeable battery inside. It does not require power supply during testing. It is suitable for field work. It can be used for 4 hours with a saturated charge.
