Introduction: The single-layer glass reactor uses the original heated oil-water dual-purpose bath to carry out various biochemical reactions and synthetic reactions under constant temperature conditions. The whole system of the instrument is closed, and the materials are gasified under various conditions of normal pressure and negative pressure. Evaporation, condensation reflux, concentration and purification, a multi-purpose machine, is an ideal pilot and production system equipment for modern chemistry, fine chemicals, bio-pharmaceuticals, and new materials synthesis. A single-layer glass reactor is equipped with a high-temperature oil-water bath to provide a hot-melt medium for a single-layer glass reactor; or an additional bath condensing coil is provided to provide a single-layer glass reactor with a cold-smelting medium; thus, the material in the reactor Perform constant temperature heating or cooling. The material is reacted in the reaction vessel, and a series of experimental processes such as evaporation and reflux of the reaction solution can be controlled. After the reaction is completed, the single-layer glass reactor material having a specification of 10 L or more can be discharged from the fully sealed discharge port of the bottom of the kettle. Convenience. Features: 1. The complete glass is made of GG17 borosilicate glass material and has excellent chemical and physical properties. 2. Frequency control, AC induction motor. Constant speed, no brush, no spark, safe and stable, can work continuously. 3. Reaction kettle lid opening: multi-function port, stirring port, feeding port, nitrogen filling port, vacuum port, thermometer socket, etc. 4. The lower discharge part is specially designed with a special design of PTFE valve for the glass flange. There is no dead angle in the container, which can be disassembled to facilitate the discharge of solid materials. 5. The whole machine has perfect sealing performance, and the negative pressure can reach below 0.095MPa under running condition. 6. The structure of the whole machine is scientific and visual, with outstanding features and practical novelty. Technical Parameters: Model: F-50L Glass material: GG-17 Discharge port off the ground: 450mm The reaction temperature of the kettle body: -80-250 degrees Vacuum degree: 0.098Mpa Mixing speed: 0-650rpm Stirring shaft diameter: 12mm Mixing power: 120W
Introduction: The single-layer glass reactor uses the original heated oil-water dual-purpose bath to carry out various biochemical reactions and synthetic reactions under constant temperature conditions. The whole system of the instrument is closed, and the materials are gasified under various conditions of normal pressure and negative pressure. Evaporation, condensation reflux, concentration and purification, a multi-purpose machine, is an ideal pilot and production system equipment for modern chemistry, fine chemicals, bio-pharmaceuticals, and new materials synthesis. A single-layer glass reactor is equipped with a high-temperature oil-water bath to provide a hot-melt medium for a single-layer glass reactor; or an additional bath condensing coil is provided to provide a single-layer glass reactor with a cold-smelting medium; thus, the material in the reactor Perform constant temperature heating or cooling. The material is reacted in the reaction vessel, and a series of experimental processes such as evaporation and reflux of the reaction solution can be controlled. After the reaction is completed, the single-layer glass reactor material having a specification of 10 L or more can be discharged from the fully sealed discharge port of the bottom of the kettle. Convenience.
