Brief introduction:
Used for measuring the surface water, tap water, sewage, sea water, hydrogen peroxide and industrial water, water body, the content of total organic carbon in to evaluation of degree of organic pollution in water body. Areas of application: environmental monitoring, urban water supply and drainage, disease control, chemical power and other industries. Conform to the Standard: DIN38409H3 ENl484 EPA415.1, 415.3 the American Standard Method 5310 b China gb GBl3193-91-138 China's ministry of health drinking water specification Features:
1. The heating temperature by software control. Combustion temperature can be adjusted within 200-950 ℃. Optional 680 ℃ or 900 ℃ + catalyst oxidation arbitrary a recognition method of oxidation.
2. Sample loop quantitative filling, high accuracy, good reproducibility.
3. The suction sample, can be used to analyze continuous samples.
4. Can tolerate roughly 400 m (including the diameter of the suspended particles in water samples, not easy jam.
5. ETTOC operation in Chinese software: first domestic TOC Chinese operating software. Software based on Windows interface, powerful, convenient operation, friendly interface.
6. The software displays real-time measurement map, facilitate intuitive monitoring analysis process. Technical parameters:
Scope: 100 PPB - 10000 PPM
Repeatability: 2% RSD
Linear error: < 4%
TC: detection rate 95% or more (10 PPM) in concentration
TIC detection rate: 95% or more (10 PPM) in concentration
Analysis of time: the TC/TIC/TOC: 4 ~ 8 minutes, can be set automatically
Method: TIC: phosphonic acid acidification
TC: when using a catalyst 680 ℃; Without catalyst at 900 ℃; In 200 ~ 950 ℃ can be adjusted
The TOC: get reduction by TC - TIC difference
Sampling method: inhaled, quantitative sample ring
Sample ring: 25 (including L, 50 (including L, including 100 L, 200 (including L, 400 (including L, optional
Carrier gas: oxygen 99.5% our fleet, CO and THC less than 1 PPM. 50 to 60 psig (345-415 kpa)
Software: Chinese ETTOC operating software
Standard: RS - 232 - C standard
Size: 35 cmx28cmx48cm
weight: 10 kg
Brief introduction:
Used for measuring the surface water, tap water, sewage, sea water, hydrogen peroxide and industrial water, water body, the content of total organic carbon in to evaluation of degree of organic pollution in water body. Areas of application: environmental monitoring, urban water supply and drainage, disease control, chemical power and other industries. Conform to the Standard: DIN38409H3 ENl484 EPA415.1, 415.3 the American Standard Method 5310 b China gb GBl3193-91-138 China's ministry of health drinking water specification
