EPP110F automatic cold filter plugging point tester
Introduction: The design, manufacture and inspection of EPP110F automatic cold filter plugging point tester comply with SH/T 0248, which is suitable for determining the cold filter plugging point of most petroleum products (fuel oil, lubricating oil, etc.). The EPP110F automatic cold filter plugging point tester has two test baths. Each test bath can independently measure the cold filter plugging point without affecting the determination of other test baths, that is, it can measure two oil samples at the same time. The operator can operate and control the instrument through the keyboard, touch screen or mouse. The entire process is automatic, and the flow of the oil sample can be observed during the entire test process. Features: 1. The EPP110 is composed of two major components: the test host and the low-temperature circulating refrigerator; the main components of the instrument are all imported materials, and the key parts are all imported components, which makes the instrument more stable and reliable. 2.EPP110F fully complies with SH/T 0248 3. The test interval can be set by the user according to the situation, and the setting range is 1～3℃, which is more humane; 4. The instrument has the functions of automatic cooling, automatic cold filter slope test, automatic temperature control, etc.; 5. The two test baths are independent of each other; two samples can be tested at the same time without affecting each other; 6. The instrument automatically detects whether the oil sample is put in to prevent the user from misoperation; 7. The test bath has an automatic preheating function, and users can set whether to preheat, preheat time and preheat temperature by themselves; 8. Users can set the start detection temperature, detection frequency, detection times and alarm temperature according to their needs; 9. The instrument has bath temperature correction and powerful data storage and query functions. The instrument can store tens of thousands of test results, which can be queried freely according to time, oil sample, tester, etc.; 10. The instrument has USB, RJ45 and RS232 interfaces, and is equipped with Wifi, which can be directly connected to the LISM system. Technical Parameters: Executive standard: SH/T 0248 Test bath: two independently controlled baths Cooling method: external circulation refrigeration Test range: -60～45℃ (according to the system of circulating refrigerator) The temperature control range of the cold bath: -68～45℃ (according to the refrigerating system) Temperature control accuracy: ±0.1℃ Repeatability: ≤2℃ Reproducibility: ≤4℃ Display screen: 10.4" color LCD, 800X600 Power supply: AC220V, 50Hz Power: 1500W Dimensions: (length) 645X (width) 660 X (height) 800mm Weight: 45Kg
Introduction: The design, manufacture and inspection of EPP110F automatic cold filter plugging point tester comply with SH/T 0248, which is suitable for determining the cold filter plugging point of most petroleum products (fuel oil, lubricating oil, etc.). The EPP110F automatic cold filter plugging point tester has two test baths. Each test bath can independently measure the cold filter plugging point without affecting the determination of other test baths, that is, it can measure two oil samples at the same time. The operator can operate and control the instrument through the keyboard, touch screen or mouse. The entire process is automatic, and the flow of the oil sample can be observed during the entire test process.
