Brief introduction: EMM - 1 type friction and wear tester for suppository - disk friction form, motor driven disc to rotate and the relative static friction each other in current situation, through the sensor, the friction, surface contact voltage, current, resistance, wear is conveying the signals to a computer interface, such as record and real-time display of measured parameters by computer and its change. The equipment is mainly used in the electric test under the condition of material and coating on the surface of tribological performance and mechanism research. Technical parameters: Load range: 50 g to 5000 g The spindle speed: 100 ~ 3000 r/min The dynamic friction coefficient showed: 0.2 ﹪ FSO Friction pair bolt size: 3 mm ~ Φ Φ 5 mm Sample size: Φ 45 mm Contact current measurement accuracy: 0.01 mA Contact point voltage measurement accuracy: 0.01 mV Power supply: dc power 0 ~ 30 v / 0 ~ 20 a
Brief introduction: EMM - 1 type friction and wear tester for suppository - disk friction form, motor driven disc to rotate and the relative static friction each other in current situation, through the sensor, the friction, surface contact voltage, current, resistance, wear is conveying the signals to a computer interface, such as record and real-time display of measured parameters by computer and its change. The equipment is mainly used in the electric test under the condition of material and coating on the surface of tribological performance and mechanism research.
