EM-5P Portable Smoke Analyzer Introduction: The EM-5P portable ultraviolet flue gas analyzer mainly consists of a monitoring unit for gas pollutants (SO2, NOX, CO, CO2), a monitoring unit for flue gas parameters (such as oxygen content), and a data acquisition and processing unit. This structure consists of a flue gas sampler, a conveying pipeline, a flue gas preprocessor, and an analyzer. This product is equipped with an Android touch screen, large storage capacity, multi port output, and real-time monitoring data printer. Applied to monitoring and process control of exhaust emissions from coal-fired power plants, garbage power plants, cement plants, glass plants, lime plants, ceramic plants, sintering processes, coke ovens, desulfurization technologies, denitrification technologies, and other industries. Features: 1. Adopting stoichiometric algorithms with low detection limits and low temperature drift. The NOX content can be directly obtained by measuring NO and NO2. 3. Excluding NO2 → NO converter. 4. Full UV spectroscopy measurement without cross interference. 5. Full spectrum electronic scanning, without optical moving parts. 6. It has low requirements for measuring gases and can be applied to working conditions with dust and high humidity. Technical parameters: Analyzer model: room temperature type: condensation dehydration/. High temperature type: High temperature throughout the process. Measurement techniques: UV DOAS (SO2, NO, NO2), electrochemical (O2), infrared/laser (CO), infrared laser TDLAS, (CO2) Range: 0-50~1500mg/m3 (SO2, NO, NO2), 0-25% (O2), 0-500~10000ppm (CO), 0-65% (CO2) Indication error: ≤ 2% F. S Zero drift: ≤ 2% F. S/24 hours. Span drift: ≤ 2% F. S/24 hours. Response time: ≤ 90s (T90) Preheating time: Normal temperature type: 10 minutes/High temperature type: 40 minutes Power: 220VAC ± 22V, room temperature type: 50W, high temperature type: 350W Working temperature: 5 ℃~45 ℃ Working humidity: 0-85% RH Size: 498mm x 182mm x 236mm Weight: 12kg
Introduction: The EM-5P portable ultraviolet flue gas analyzer mainly consists of a monitoring unit for gas pollutants (SO2, NOX, CO, CO2), a monitoring unit for flue gas parameters (such as oxygen content), and a data acquisition and processing unit. This structure consists of a flue gas sampler, a conveying pipeline, a flue gas preprocessor, and an analyzer. This product is equipped with an Android touch screen, large storage capacity, multi port output, and real-time monitoring data printer. Applied to monitoring and process control of exhaust emissions from coal-fired power plants, garbage power plants, cement plants, glass plants, lime plants, ceramic plants, sintering processes, coke ovens, desulfurization technologies, denitrification technologies, and other industries.
