EM-5-Ex Continuous Emission Monitoring System Introduction: Our company has developed a positive pressure explosion-proof continuous emission monitoring system based on the standard continuous emission monitoring system (condensation). The EM-5-Ex continuous emission monitoring system consists of an explosion-proof dust monitoring subsystem, an explosion-proof gas pollutant monitoring subsystem, an explosion-proof flue gas parameter monitoring subsystem, and a system control and data acquisition and processing subsystem. It can monitor SO2, NOX, O2, dust, temperature, pressure, speed, etc. Other parameters can be extended according to the needs of special occasions, such as HCl, HF, CO, CO2, humidity, etc. Features: 1. Equipped with a full range of explosion-proof subsystems to ensure the safety of the monitoring system and the personal safety of on-site personnel. 2. Secondary condensation can quickly remove water and cool, reduce the contact time between gas and water, and reduce SO2 loss. 3. Adopting mild heat tracing technology reduces maintenance of the measurement cell. 4. Quickly sample through a loop sampling pump to shorten response time. 5. Achieve full calibration and zeroing. 6. Not subject to cross interference from CO, CO2, CH4, NH3, moisture, or other organic substances. 7. Multi stage filtration for dust and water removal, with simple structure and high reliability. Technical parameters: SO2: 0-300-3000ppm, O2: 0-25%. NOX: 0-3000~3000ppm, humidity 0-40%. Dust: 0-200mg/m3, 0-10g/m3. Speed: 0-40m/s (customizable). Temperature: 0-300 ℃ (customizable). Pressure: -10kPa~10kPa (customizable). Size: 800mmx800mmx2000mm. Tracing temperature: 120 ℃~180 ℃. IP level: IICT4. Power supply: (220 ± 15%) VAC, 4000W. Working temperature: -10 ℃~40 ℃. Working humidity: 0-95% RH (non condensing).
Introduction: Our company has developed a positive pressure explosion-proof continuous emission monitoring system based on the standard continuous emission monitoring system (condensation). The EM-5-Ex continuous emission monitoring system consists of an explosion-proof dust monitoring subsystem, an explosion-proof gas pollutant monitoring subsystem, an explosion-proof flue gas parameter monitoring subsystem, and a system control and data acquisition and processing subsystem. It can monitor SO2, NOX, O2, dust, temperature, pressure, speed, etc. Other parameters can be extended according to the needs of special occasions, such as HCl, HF, CO, CO2, humidity, etc.
