EM-5 continuous monitoring system for flue gas emissions Introduction: The EM-5 continuous monitoring system for flue gas emissions consists of four basic parts: smoke and dust monitoring subsystem, gaseous pollutant monitoring subsystem, flue gas parameter monitoring subsystem, system control and data processing subsystem. It can monitor parameters such as SO2, NOX, O2, dust, temperature, pressure, flow rate, humidity, etc. in the gas. Application fields: Detection and process control of tail gas emissions from coal-fired power plants, garbage combustion power plants, cement plants, glass plants, lime plants, ceramic plants, sintering, coke ovens, desulfurization processes, denitrification processes, etc. Features: The product flue gas does not require full high-temperature heat tracing or condensation dehumidification; The heat tracing pipe directly uses polytetrafluoroethylene pipe, without the need for full heat tracing, saving costs and avoiding safety hazards; When the distance between the monitoring point and the analysis cabin exceeds 70m, the conventional heat tracing pipe cannot be used, and the dilution method monitoring system can be unaffected; The ultraviolet fluorescence method and chemiluminescence method have significant advantages in measuring gaseous pollutants in the field of ultra-low measurement; It can achieve full calibration and backend calibration. Technical parameters: Cl2: 0~100ppm (customizable). O2: 0~25%. Dust: 0~5mg/m3, 0~50g/m3. Velocity: 0~40m/s (customizable). Temperature: 0~300℃ (customizable). Pressure: -10kPa~10kPa (customizable). Dimension: 800mmx600mmx2000mm. IP grade: cabinet IP42, others IP65. Power supply: (220±15%)VAC, 5000W. Working temperature: -20℃~50℃. Working humidity: 0~95%RH (non-condensing). Compressed air: (0.4~0.8)MPa, 0.25m3/min, clean, oil-free & water-free.
Introduction: The EM-5 continuous monitoring system for flue gas emissions consists of four basic parts: smoke and dust monitoring subsystem, gaseous pollutant monitoring subsystem, flue gas parameter monitoring subsystem, system control and data processing subsystem. It can monitor parameters such as SO2, NOX, O2, dust, temperature, pressure, flow rate, humidity, etc. in the gas. Application fields: Detection and process control of tail gas emissions from coal-fired power plants, garbage combustion power plants, cement plants, glass plants, lime plants, ceramic plants, sintering, coke ovens, desulfurization processes, denitrification processes, etc.
