Brief introduction: The product is suitable for use in electrical, electronics, instruments and meters and other products, spare parts and materials in storage, transportation, high and low temperature alternating hot and humid environment when using adaptive test. Technical indicators: Nominal content product (l) : 120 ~ 1000; Temperature range: 70 ℃ ~ + 150 ℃; Humidity range: 25 ~ 98% RH; Temperature fluctuation degree, plus or minus 0.5 ℃; Temperature deviation: plus or minus 2.0 ℃; Humidity deviation: + / - 3.0% RH (> 75% RH), plus or minus 5.0% RH (75% RH or less); Thermal control ways: wet wet BTHC balance temperature adjustment way; Material shell: two-sided galvanized steel, the surface coating processing (the company standard color); The lining for stainless steel SUS304; Insulation: rigid polyurethane foam + glass fiber; Heater: nickel chromium alloy electric heater; Fan, centrifugal fan; Cooling method: single-stage mechanical compression refrigeration (air cooling or water cooling) or dual mechanical compression cascade refrigeration (air cooling or water cooling); Refrigeration compressor: closed compressor; Controller: displays 5.7 "color, liquid crystal display (LCD); Operation mode: program mode, fixed value mode, set the way: touch (piezoelectric); Program capacity: 120 programs, each program's largest 1200 steps (section), maximum 999 - cycle; The display resolution time: 0.1 min; Temperature: 0.1 ℃; Humidity: 0.1% RH; Water supply: water pump, built-in storage tank; Water: the resistance rate > 500 Ω, m; Power supply: AC380 (1 + / - 10%) V/(50 + / - 0.5 Hz), three phase four wire + protection ground;
Brief introduction: The product is suitable for use in electrical, electronics, instruments and meters and other products, spare parts and materials in storage, transportation, high and low temperature alternating hot and humid environment when using adaptive test.