Introduction: The conical twin-screw torque rheometer consists of a main control unit and a conical twin-screw unit that simulates the production of a conical twin-screw extruder in the laboratory. The unique structural design makes it easier and faster to clean up corrosive materials after each experiment. The equipment is especially suitable for processing PVC powder, supplemented by different molds, and can directly extrude plates, pipes and profiles for experiments. Technical Parameters: Structure mode: double segment separable Screw diameter: 20-39mm Effective length of screw: 325mm Effective length of the barrel: 340mm Double tube barrel: 20-40mm Maximum temperature: 350°C Temperature sensor: J-type thermocouple Heating power / zone: 550W Heating zone: 4 zones Cooling method: compressed air Feeding method: spiral metering feed Feeding motor brand: JSCC, speed ratio 50:1, manual speed regulation Flat die: Mold specification: 60 × 1.5mm Heating power: 0.2KW (imported heating pipe) × 6 = 1.2KW Two-way temperature measurement: material temperature and mold temperature All the way pressure measurement: material pressure Flat mold shaping traction device: Material: 3Cr13 Shaped groove specification: 75mm × 0.8mm Shaped thickness range: 0.9~2.0mm Stereotype: upper and lower surface friction setting, side free Stereomode cooling method: water cooling Traction method: belt traction Traction motor: JSCC, manual speed control Motor power: 60W Traction speed: 0.24~2.5m/min
Introduction: The conical twin-screw torque rheometer consists of a main control unit and a conical twin-screw unit that simulates the production of a conical twin-screw extruder in the laboratory. The unique structural design makes it easier and faster to clean up corrosive materials after each experiment. The equipment is especially suitable for processing PVC powder, supplemented by different molds, and can directly extrude plates, pipes and profiles for experiments.
