E10 sulfur dioxide analyzer Introduction: The E10 sulfur dioxide analyzer uses the widely used and validated ultraviolet fluorescence (UVF) method to detect low levels of SO2 gas in ambient air or industrial gases, and can obtain SO2 concentrations that reach the resolution level of PPB. The product is used for: environmental air quality analysis; Indoor air quality analysis; Mobile laboratory; Measurement of flue gas emissions from chemical plants; Monitoring of gas emissions in pulp and paper mills; Monitoring of exhaust emissions from sewage treatment equipment; Monitoring of diluted flue gas emissions; Measurement of gas concentration during the production process. characteristic: 1. Stable measurement, can eliminate interference from other gases, and can adapt to changes in environmental temperature; 2. Designed with a 3U structure, the equipment is lightweight and easy to assemble; 3. High performance human-machine interface interaction, rich display content, easy operation and maintenance; 4. Provide a product warranty of up to 2 years; Real time acquisition of monitoring data and display of calibration curves; 5. Users can set multiple alarm thresholds to distinguish different alarm states; 6. Equipped with an internal diagnostic system to provide real-time monitoring and early warning of the internal working status of the instrument; 7. Comes standard with a universal network interface and RS232 interface, allowing for direct data export or remote access via network connection. Technical parameters: Detection range: Minimum: 0-5 ppb full scale Maximum: 0-100 ppm full scale (optional, dual range) Units: ppb, ppm, ug/m3, mg/m3 (optional) Zero point noise: 50ppt (average) Range noise: 0.5% of the reading value above 5ppb Minimum detection limit: 100ppt Zero drift:<0.2ppb (24 hours)
Introduction: The E10 sulfur dioxide analyzer uses the widely used and validated ultraviolet fluorescence (UVF) method to detect low levels of SO2 gas in ambient air or industrial gases, and can obtain SO2 concentrations that reach the resolution level of PPB. The product is used for: environmental air quality analysis; Indoor air quality analysis; Mobile laboratory; Measurement of flue gas emissions from chemical plants; Monitoring of gas emissions in pulp and paper mills; Monitoring of exhaust emissions from sewage treatment equipment; Monitoring of diluted flue gas emissions; Measurement of gas concentration during the production process.
