DX-LLX-1 radar current meter Introduction: DX-LLX-1 radar current meter is a radar type flow measurement product. It uses the Doppler radar velocity measurement principle to detect the surface velocity of water flow. The microwave radar is not affected by temperature gradient, pressure, air density, wind or other meteorological environmental conditions, and can work steadily all day, all day. At the same time, the radar can set different transmission frequencies, which can effectively avoid the mutual interference of radar beams of adjacent products during multi-point close range detection. In addition, the monitoring system or unit can measure the water flow of natural river/urban river, canal/culvert/pipeline profile according to the velocity value (multi-point measurement) obtained by detection, together with the geometric shape information of river section, etc. The product is applied to the monitoring of water flow velocity in natural rivers, canals/culverts/pipelines. characteristic: 1. Built in imported radar detection module. 2. CW planar microstrip radar non-contact detection is not affected by climate, sediment and floating objects. 3. Fast and accurate measurement, stable data output, and suitable for high velocity environment in flood season. 4. The antenna transmission frequency is flexible and adjustable, which can effectively avoid mutual interference of multiple products. 5. Multiple data communication interfaces can be set to facilitate user system connection. 6. The measurement operation mode is combined with the sleep mode to save energy and reduce consumption. 7. It is designed to prevent internal condensation, water and lightning, and is applicable to various outdoor environments. 8. Compact appearance, easy installation and maintenance. Technical parameters: Effective distance: 0-40m Measuring range: 0.10-20m/s; 0.10-40m/s Measurement accuracy: ± 0.01m/s; ± 1% of measured flow rate Resolution: 0.001m/s Power supply range: 9-26VDC Power supply current:<50mA (12V) Standby current:<1mA Communication interface: RS485 (Modbus), 4-20mA Operating temperature: - 20-60 ℃ Storage temperature: - 20-70 ℃ Relative humidity: 0-95% RH Protection grade: IP67
Introduction: DX-LLX-1 radar current meter is a radar type flow measurement product. It uses the Doppler radar velocity measurement principle to detect the surface velocity of water flow. The microwave radar is not affected by temperature gradient, pressure, air density, wind or other meteorological environmental conditions, and can work steadily all day, all day. At the same time, the radar can set different transmission frequencies, which can effectively avoid the mutual interference of radar beams of adjacent products during multi-point close range detection. In addition, the monitoring system or unit can measure the water flow of natural river/urban river, canal/culvert/pipeline profile according to the velocity value (multi-point measurement) obtained by detection, together with the geometric shape information of river section, etc. The product is applied to the monitoring of water flow velocity in natural rivers, canals/culverts/pipelines.
