Introduction: DTD-60 type constant temperature digester digestion principle: The sample and digestive liquid are placed in the digestive tract, digested at a constant temperature, after thorough digestion of the sample for a variety of instrument analysis and chemical analysis. Digestion samples range: food samples, various water samples, biological samples (blood, urine, hair), cosmetics, etc. Features: 1. Wrap-around heat transfer, fast digestion, high efficiency, energy saving 2, the unique cooling system, the shell temperature <38 °C, longer life, more secure 3, superior insulation performance, insulation after power off up to 5 hours 4, the heating rate is fast, 15 minutes up to 150 °C, the temperature is uniform 5, using a new temperature control program and a unique heating method, so that the temperature difference between the holes is less than ± 0.5 °C 6, fool-style operating procedures, easier to use, more secure use. Technical Parameters: Temperature control range: room temperature -300 °C (special instructions: the temperature refers to the temperature of the thermostatic block, the temperature of the digested sample solution is consistent with the boiling point of the digestion solution) Temperature control accuracy (temperature difference between holes): ±0.5°C Digestion pond size: Φ16mm (aperture)*60mm (hole depth) (applicable to digestive tubes with outer diameter Φ15mm) Sample tube: 64 tubes Temperature control method: microcomputer PID control, LED display, clear and intuitive. Heating power: 1500W Heating part material: aluminum alloy (optional spray Teflon layer) Supply voltage: 220V 50Hz
Introduction: DTD-60 type constant temperature digester digestion principle: The sample and digestive liquid are placed in the digestive tract, digested at a constant temperature, after thorough digestion of the sample for a variety of instrument analysis and chemical analysis. Digestion samples range: food samples, various water samples, biological samples (blood, urine, hair), cosmetics, etc.
