Features: 1. Silent: The body is made of streamlined ABS shell material, which is resistant to corrosion and noise reduction; The inner tank is made of double-layer soundproof cotton, and the overall noise is less than 60 decibels; 2. Operation: microcomputer intelligent mode; 3. Display: Real color 4.3-inch touch screen menu control, real-time Chinese status display; 4. Interface: Chinese and English, can be switched at will; 5. Ultrasonic power: 800W, can be adjusted arbitrarily from 1-100%, and can be operated repeatedly in stages. 6. Ultrasonic frequency: 40KHz (default 40KHz, another 25/28/33/50KHz optional), applicable to different cleaning requirements, completely solve the cleaning blind zone; 7. Temperature: heating power ≥1000W, room temperature -80 °C adjustable, real-time display; 8. Timing: 200000 minutes, continuously adjustable, the remaining time is displayed in real time; 9. Note / Drainage: Fully automatic injection, drainage control, can be programmed; 10. Intelligent memory: automatic interruption of working parameters or power off; 11. Circuit: Built-in frequency sweep function, industrial grade board, can work continuously for 72h; 12. Tank: Add food grade stainless steel SUS304, acid and alkali resistant, corrosion resistant, beautiful appearance and technical texture; 13. Manual mode: It can set temperature, time, ultrasonic power, frequency, and liquid level sensor. It can realize one-button water injection and drainage, and can work continuously with two different ultrasonic powers. For example, it can work for 99% of ultrasonic power for half an hour (can be set to 1-99min), automatically switch to 50% ultrasonic power to continue working for half an hour (can be set 1-99min). 14. Fully automatic mode: automatic “inlet-work-drainage” can be realized with one button; temperature, time, power and frequency can be set to achieve different power (1-99%) at different frequencies (1-99%) at frequency F1 Repeat the work (1-99 times), and set the drainage time to combine into different water exchange modes (when there is cleaning liquid, the concentration of cleaning solution can be gradually reduced). Technical Parameters: Model: DTA-33 Appearance (length * width * height): 690 × 510 × 390 Inner groove (length * width * height): 504 × 304 × 217 Capacity: 33L Ultrasonic power: 800W Ultrasonic frequency: 40KHz Heating power: ≥ 1000W Time setting: 0-999*2*99min Temperature setting: room temperature -80 ° C Rated voltage: 220-240V AC, 50/60Hz
Features: 1. Silent: The body is made of streamlined ABS shell material, which is resistant to corrosion and noise reduction; The inner tank is made of double-layer soundproof cotton, and the overall noise is less than 60 decibels; 2. Operation: microcomputer intelligent mode; 3. Display: Real color 4.3-inch touch screen menu control, real-time Chinese status display; 4. Interface: Chinese and English, can be switched at will; 5. Ultrasonic power: 800W, can be adjusted arbitrarily from 1-100%, and can be operated repeatedly in stages. 6. Ultrasonic frequency: 40KHz (default 40KHz, another 25/28/33/50KHz optional), applicable to different cleaning requirements, completely solve the cleaning blind zone; 7. Temperature: heating power ≥1000W, room temperature -80 °C adjustable, real-time display; 8. Timing: 200000 minutes, continuously adjustable, the remaining time is displayed in real time; 9. Note / Drainage: Fully automatic injection, drainage control, can be programmed; 10. Intelligent memory: automatic interruption of working parameters or power off; 11. Circuit: Built-in frequency sweep function, industrial grade board, can work continuously for 72h; 12. Tank: Add food grade stainless steel SUS304, acid and alkali resistant, corrosion resistant, beautiful appearance and technical texture; 13. Manual mode: It can set temperature, time, ultrasonic power, frequency, and liquid level sensor. It can realize one-button water injection and drainage, and can work continuously with two different ultrasonic powers. For example, it can work for 99% of ultrasonic power for half an hour (can be set to 1-99min), automatically switch to 50% ultrasonic power to continue working for half an hour (can be set 1-99min). 14. Fully automatic mode: automatic “inlet-work-drainage” can be realized with one button; temperature, time, power and frequency can be set to achieve different power (1-99%) at different frequencies (1-99%) at frequency F1 Repeat the work (1-99 times), and set the drainage time to combine into different water exchange modes (when there is cleaning liquid, the concentration of cleaning solution can be gradually reduced).
