Position: Home > > Environmental monitoring and analysis > Water organic pollutants > COD measuring instrument > DRUV-2200S UV method COD sensor for COD online detection

DRUV-2200S UV method COD sensor for COD online detection

Product ID:HSYJcodc049

Price: Please inquire PDF Format
Supply Ability:500 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberDRUV-2200S
    Brand NameSHANDONGDONGRUN
    Payment TermsTT,PAYPAL
    DRUV-2200S UV method COD sensor
     
    Introduction:
    The DRUV-2200SUV COD sensor uses the 254nm spectral absorption coefficient SAC254 to reflect the important measurement parameters of the soluble organic content in water based on the absorption of organic matter to ultraviolet light, and can be converted into COD value under certain conditions. This method can realize continuous monitoring without any reagents.
    typical application:
    Continuous monitoring of organic matter load in the sewage treatment process, online real-time monitoring of water quality in and out of wastewater treatment plants; continuous online monitoring of surface water, industrial wastewater, and fishery wastewater.
    Technical parameter:
    Measuring range: 0~2000mg/L COD (2mm optical path) 0~1000mg/L COD (5mm optical path)
                        0~90mg/L COD (50mm optical path)
    Measurement accuracy: ±5%
    Repeatability: ±2%
    Resolution: 0.01 mg/L
    Pressure range: ≤0.4MPa
    Sensor material: Body: 316L (normal version), titanium alloy (sea water version);
    Cable: PUR
    Power supply: 9~36VDC
    Communication protocol: MODBUS RS485
    Protection level: IP68
    Storage temperature: -15 to 50°C
    Working temperature: 0 to 45°C (no freezing)
    Cable length: standard 10 meters cable, can be extended to 100 meters
     
  • Introduction:
    The DRUV-2200SUV COD sensor uses the 254nm spectral absorption coefficient SAC254 to reflect the important measurement parameters of the soluble organic content in water based on the absorption of organic matter to ultraviolet light, and can be converted into COD value under certain conditions. This method can realize continuous monitoring without any reagents.
    typical application:
    Continuous monitoring of organic matter load in the sewage treatment process, online real-time monitoring of water quality in and out of wastewater treatment plants; continuous online monitoring of surface water, industrial wastewater, and fishery wastewater.
     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com