Introduction: The product adopts the principle of detecting the scattered light in the 90° direction, according to EN27027 and ISO7027 standards, using 860nm infrared light as the light source, without being interfered by the chromaticity of the sample, and measuring the scattering of light generated by insoluble particulate matter suspended in water. Degree, quantitative measurement of suspended particulate matter. Mainly used for the turbidity detection of pre-filtration, post-filtration, precipitation and factory water in water plants; monitoring of pipe network water quality, industrial process water quality, circulating cooling water, carbon filter effluent, membrane filtration effluent, etc.; sewage treatment Water quality monitoring of water outlets, drains, reservoirs, and wells; online turbidity monitoring in industries such as electricity, purified water, beverages, wine making, and pharmaceuticals. Features: 1. Standard 90-degree scattered light measurement technology, in line with USEPA method 180.1 specifications, providing reliable measurement results; 2. Low-volume flow-through type: integrated installation design, removable and washable defoamer, easy maintenance; 3. High-range flow-through type: integrated installation surface scattering method design to avoid direct contact with sewage and reduce maintenance; 4. Built-in voltage stabilizing and defoaming device to eliminate the influence of bubbles on the measured value; 5. Using infrared laser scattering mode, high sensitivity, stable and reliable, and fast response speed in the low turbidity range; Technical Parameters: Measuring range: 0-20/200/2000/5000NTU Accuracy: ±2%FS Zero drift: less than 0.5% Repeatability: better than reading ±2% Response time: 1s Sampling flow rate: 400-1000ml/min Water inlet pressure: 0.05-0.2Mpa Water sample temperature: 0-40℃, no freezing Light source: 860nm Light source life: more than 30000 hours
Introduction: The product adopts the principle of detecting the scattered light in the 90° direction, according to EN27027 and ISO7027 standards, using 860nm infrared light as the light source, without being interfered by the chromaticity of the sample, and measuring the scattering of light generated by insoluble particulate matter suspended in water. Degree, quantitative measurement of suspended particulate matter. Mainly used for the turbidity detection of pre-filtration, post-filtration, precipitation and factory water in water plants; monitoring of pipe network water quality, industrial process water quality, circulating cooling water, carbon filter effluent, membrane filtration effluent, etc.; sewage treatment Water quality monitoring of water outlets, drains, reservoirs, and wells; online turbidity monitoring in industries such as electricity, purified water, beverages, wine making, and pharmaceuticals.
