DPOFLEX BP02 Industrial Peristaltic Pump Introduction: DPOFLEX BP02 adopts a stainless steel shell to meet different application requirements. IP66 high level protection, suitable for complex and harsh environments. Supports various fieldbus communications such as Ethernet, digital and analog input/output control; Level 3 user permission management, GMP laboratory requires support for multiple sensing technologies: leakage detection, lid opening and shutdown, flow sensors, and predictive maintenance. characteristic: 1. Provide two options of stainless steel material and die cast aluminum material to meet different application needs 2. IP66 high-level protection, suitable for complex and harsh environments 3. Support multiple fieldbus communications, digital and analog input/output control 4. Third level user permission management, equipped with electronic signature and audit tracking functions, meeting the requirements of 21CFR Part 11 regulations 5. Multiple intelligent detection technologies: pressure tube detection, flow detection, pipeline fluid pressure detection, to achieve predictive maintenance Technical parameters: Product model: dPOFLEX BP02 Shell material: 304 stainless steel Speed range: 1rpm-300rpm, reversible in both forward and reverse directions Speed adjustment resolution: 0.1rpm Display: 3.5-inch industrial grade LCD screen, available in Chinese or English Real time clock function: can set display clock and be used for logging Working modes: flow mode, quantitative mode, calibration mode Flow mode: The pump runs continuously according to the set flow rate, and displays the flow rate and speed during operation Flow setting range: 1.0ml/min-9L/min (depending on pump head and hose) Quantitative mode: According to the set dispensing volume, dispensing frequency, interval time, and suction parameters, continuous automatic quantitative dispensing is performed. During operation, single dispensing volume, cumulative dispensing volume, and dispensing frequency/total frequency are displayed Quantitative single distribution range: 1mL -225L (depending on pump head and hose) Quantitative frequency: 1-9999 times, infinite loop Quantitative interval time: 1s-9999s Calibration function: Improve the accuracy of transmission flow and filling liquid volume Control methods: button control, external signal control, communication control Communication control: Interface: RS485, Industrial Ethernet (optional), Profibus (optional) Communication protocols: Modbus RTU, Modbus TCP/IP (optional), Profibus DP (optional) External control function: Speed control signal: 0-5V/0-10V/0-10kHz/4-20mA, direction and start stop control signal: level signal or relay signal Status output function: Output speed signal: Frequency signal Output start stop and fault status: relay signal Pressure tube detection function: The function can be set. If abnormal pressure tube is detected during operation, the pump will automatically stop running and prompt an alarm message Flow/pressure detection (optional): The flow rate is detected by an ultrasonic flowmeter, and the fluid pressure in the pipeline is detected by a pressure sensor. The measured value is displayed on the screen Power on operation status: Flow mode: The state can be set before power on shutdown or power off restoration; Quantitative mode: Power on stop Button lock function: The function can be set to prevent accidental operation Permission Management: Provides three-level permission management (administrator, technician, operator) Data traceability and electronic signature: meet the audit trail requirements of FDA 21CFR Part 11 regulations Logging function: Keep running logs for at least 90 days, which can be viewed and exported 3Q Verification System: IQ/OQ Dimensions (length * width * height): Driver only: 215 x 362 x 258mm Applicable power supply: AC100-240V/115W 50/60Hz Working environment temperature: 5-40 ℃ Relative humidity of working environment: maximum 100% RH Protection level: IP66 Weight (excluding pump head): ≤ 10.5kg
Introduction: DPOFLEX BP02 adopts a stainless steel shell to meet different application requirements. IP66 high level protection, suitable for complex and harsh environments. Supports various fieldbus communications such as Ethernet, digital and analog input/output control; Level 3 user permission management, GMP laboratory requires support for multiple sensing technologies: leakage detection, lid opening and shutdown, flow sensors, and predictive maintenance.
