DPOFLEX BP01 Industrial Peristaltic Pump Introduction: DPOFLEX BP01 peristaltic pump is a new product in the industrial pump series. This product is mainly aimed at the biopharmaceutical field. Stainless steel shell, capable of transmitting up to 17L/min. Optional ordinary pump head or low pulsation pump head, with a protection level of IP66. Supports 4.3-inch industrial grade display control and external control. characteristic: 1. Made of stainless steel material to meet different application needs 2. IP66 high-level protection, suitable for complex and harsh environments 3. Support multiple fieldbus communications, digital and analog input/output control 4. Level 3 user permission management, GMP laboratory requirements 5. Support multiple sensing technologies: leakage detection, lid opening and shutdown, flow sensors, which can achieve predictive maintenance Technical parameters: Applicable pump heads: GPH01, GPH02, GPH03, LPH01 Shell material: 304 stainless steel Speed range: 0.1rpm-265rpm, reversible in both forward and reverse directions Speed adjustment resolution: 0.1rpm Display language: Chinese or English can be set Control methods: button control, external signal control, communication control Real time clock function: available Working modes: flow mode, quantitative mode, calibration mode Flow mode: The pump runs continuously according to the set flow rate, and displays the flow rate and speed during operation Flow setting range: 1.1ml/min-17.0L/min (depending on pump head and hose) Quantitative mode: Continuous automatic quantitative distribution is performed according to the set dispensing volume, dispensing frequency, interval time, and displays single dispensing volume, cumulative dispensing volume, and dispensing frequency/total frequency during operation Quantitative single distribution range: 1.0mL-274.9L (depending on pump head and hose) Quantitative frequency: 1-9999 times, infinite loop Quantitative interval time: 5-9999 seconds Display mode: 4.3-inch industrial grade LCD screen Input: Waterproof film button Flow correction: Input the actual flow value and automatically perform flow correction. The correction time can be set Communication interface: RS485, TCP/IP (optional) Communication protocol: Supports Modbus RTU, Industrial Ethernet, Profibus DP (optional) Analog input function: 0~10V analog input 1 channel, 4~20mA analog input 1 channel Analog output function: 0~10V analog output 1 channel, 4~20mA analog output 1 channel Digital input function: direction switching trigger, start/stop control trigger Digital output function: frequency speed output, 3-channel configurable relay output Open lid shutdown function: Yes In case of accidental power failure, the device should be stopped immediately. After restoring power and restarting, personnel must be required to operate it and it should not automatically turn on Lock screen anti misoperation: Yes Leakage detection function: Yes (optional) Flow detection and display function flowmeter (optional) Level 3 permission management function: Yes Electronic signature function: meets the audit tracking requirements of FDA 21CFR Part 11 regulations Logging function: Yes 3Q Verification System: IQ/OQ Certification: CE, UKCA (TUV SUD certification) Safety regulations: EN 61010-1:2010, EN IEC 61010-2-201; EMC：EN IEC61000-6-2，EN IEC 61000-6-4 Dimensions (length * width * height), excluding pump head: 260 * 407 * 290mm Applicable power supply: AC100-240V 50/60Hz Working environment temperature: 5-40 ℃ Relative humidity of working environment: maximum 100% RH Protection level: IP66 Weight (excluding pump head): ≤ 16.6kg
Introduction: DPOFLEX BP01 peristaltic pump is a new product in the industrial pump series. This product is mainly aimed at the biopharmaceutical field. Stainless steel shell, capable of transmitting up to 17L/min. Optional ordinary pump head or low pulsation pump head, with a protection level of IP66. Supports 4.3-inch industrial grade display control and external control.
