DP110-30 ultra-thin electronically controlled translation stage Introduction: The ultra-thin electronically controlled translation stage is a precision electric stage for optical experiments. With cross roller guide module Precision electric translation stage (cross roller) is equipped with stepper motor and RS232 interface. The company's self-developed motion controller can realize automatic control. The product structure is small and light, suitable for light load, low speed use, scientific test. Features: 1. Standard stepping motor and RS232 interface, the company's self-developed motion controller can achieve automatic control 2. The product structure is small and light, suitable for light load, low speed use, scientific test 3. High quality fine grinding screw drive, small lead, the same subdivision number can achieve high resolution 4. Ingenious air-returning nut structure design can minimize the gap of the grinding screw pair 5. The guide rail adopts the cross roller guide rail, which is comfortable to move, and has the function of laterally adjusting the pre-tightening force of the guide rail and eliminating the gap. 6. Fine grinding electroplating table bottom plate and reasonable rail fixing method greatly reduce the pitch and yaw of the electro-shifting table, so that the straightness and parallelism of the movement are greatly improved. 7. The stepping motor and the grinding screw are connected by imported high-quality elastic couplings, the transmission is synchronized, the depolarization performance is good, the eccentric disturbance is greatly reduced and the noise is small. 8. With hand wheel for easy debugging 9. Zero position and limit switch are installed at both ends to facilitate accurate positioning and protection of products 10. The base has threaded holes and through holes with standard hole spacing for easy installation and fixing. 11. Can be replaced with servo motor, grating ruler, accept product modification and tailor-made Technical Parameters: Stroke: 30mm Table size: 90×90mm Screw specifications: Grinding screw (lead 1 mm) Guide rail: precision cross roller guide Stepper motor (1.8°): 42BYG Body material: Aluminum alloy Surface treatment: anodized black Countertop load: 15kg Weight: 1.25kg Resolution: 5μ (no subdivision) 0.25μ (20 subdivision) Maximum speed: 10mm/sec Repeat positioning accuracy: 5μ Absolute positioning accuracy: 10μ Straightness: 8μ Motion parallelism: 15μ Pitch: 25′′ Pivot: 20′′ Return clearance: 2μ Lost step: 2μ
Introduction: The ultra-thin electronically controlled translation stage is a precision electric stage for optical experiments. With cross roller guide module Precision electric translation stage (cross roller) is equipped with stepper motor and RS232 interface. The company's self-developed motion controller can realize automatic control. The product structure is small and light, suitable for light load, low speed use, scientific test.
