DP-25 Single Stamping Machine Introduction: The DP-25 single stamping machine is a fully enclosed, high configuration single stamping machine that can be frequency controlled. The exterior and contact material parts are all made of stainless 304 material, and the maximum pressing diameter can reach 25mm. The glass cover is fully enclosed to prevent dust from flying. The DP25 single stamping press is a continuous automatic tablet press used by pharmaceutical, chemical, electronic, food, laboratory and other departments to compress powder and granular raw materials into tablets. The material utilization rate is high, the structure is reasonable, the operation is convenient, the volume is small, the pressure is high, the noise is low, and the difference in tablet weight is small. The filling depth of the material and the thickness of the tablet can be continuously adjusted. Fully compliant with national pharmaceutical hygiene requirements, it is equipment used in research institutes, pharmaceutical process rooms, and hospital preparation rooms. This machine is safer and more standardized in the production process. characteristic: The machine is fully enclosed to prevent dust cross contamination and comply with GMP requirements; Safety protection devices, more reasonable and humanized design; Enable the machine to have a larger operating space; Outstanding load-bearing capacity, suitable for a larger range of tablet production. Technical parameters: model: DP-25 Impulse modulus (payment): 1 Maximum compression diameter (mm): 25 Maximum production (tablets/minute): 60 Maximum main pressure (kN): 50 Maximum filling depth (millimeters): 20 Tablet thickness (mm): 8 Motor power (kW): 220V/50HZ，1.5KW Dimensions (millimeters): 580x500x830 Whole machine weight (kg): 150
Introduction: The DP-25 single stamping machine is a fully enclosed, high configuration single stamping machine that can be frequency controlled. The exterior and contact material parts are all made of stainless 304 material, and the maximum pressing diameter can reach 25mm. The glass cover is fully enclosed to prevent dust from flying. The DP25 single stamping press is a continuous automatic tablet press used by pharmaceutical, chemical, electronic, food, laboratory and other departments to compress powder and granular raw materials into tablets. The material utilization rate is high, the structure is reasonable, the operation is convenient, the volume is small, the pressure is high, the noise is low, and the difference in tablet weight is small. The filling depth of the material and the thickness of the tablet can be continuously adjusted. Fully compliant with national pharmaceutical hygiene requirements, it is equipment used in research institutes, pharmaceutical process rooms, and hospital preparation rooms. This machine is safer and more standardized in the production process.
