DMYB-2 Bow Surface Strain Gauge Introduction: It can be used for long-term detection (monitoring) of the surface strain of static, dynamic and static and low-frequency dynamic load tests in the load test of steel structures and concrete structures of bridges, large and medium-sized civil structures. The bow-shaped surface resistance strain gauge is suitable for monitoring the strain in the beam, column, pile foundation, tunnel lining and bedrock of the concrete structure for a long time. The digital temperature measuring table can be selected as the temperature measuring element. In the measurement process, it is also necessary to pay attention to adjusting according to the special conditions of the building. For the external structure of the building, measures should be taken to prevent the concrete structure from being stressed as much as possible during the construction process. Technical parameter: Gauge length L(mm): 125 Range (με) : 0~3000 Accuracy: ≤0.3 %F•S (Note: F•S is the full scale output value) Bridge resistance: 350 ohms Applicable objects: Surface strain Protection class: IP62
Introduction: It can be used for long-term detection (monitoring) of the surface strain of static, dynamic and static and low-frequency dynamic load tests in the load test of steel structures and concrete structures of bridges, large and medium-sized civil structures. The bow-shaped surface resistance strain gauge is suitable for monitoring the strain in the beam, column, pile foundation, tunnel lining and bedrock of the concrete structure for a long time. The digital temperature measuring table can be selected as the temperature measuring element. In the measurement process, it is also necessary to pay attention to adjusting according to the special conditions of the building. For the external structure of the building, measures should be taken to prevent the concrete structure from being stressed as much as possible during the construction process.
