DMT-E metal coating thickness gauge Introduction: Metal coating thickness gauge DMT-E is suitable for testing the resistance value, uniformity and thickness of various aluminized film and aluminized paper. The test process is short and convenient. The operator only needs to cut the sample of the specified size and place it on the instrument. Measuring position, the instrument can automatically complete the whole experimental process, the test accuracy is high, the process is short, and the metal coating thickness gauge DMT-E is suitable for all aluminized film manufacturers, quality inspection institutions and other units. Test principle: The metal coating of the sample is a piece of metal conductor. The resistance of the metal plating of the sample of the specified length and width is measured according to Ohm's law. The thickness of the metal coating is expressed by the square resistance or the thickness is directly calculated. Features: 1. Microcomputer control, LCD liquid crystal display, PVC operation panel, convenient for users to quickly and intuitively view inspection data and results 2. Temperature display function 3. High precision contact measurement 4. Data display resistance value and thickness value in real time 5. Metal plating thickness gauge has test result memory function, convenient for users to inquire 6. Configure the micro printer to quickly print the sheet resistance value, thickness value, uniformity Technical Parameters: Thickness measurement range: 90-590Å Square resistance measurement range: 0.5-10Ω Square resistance measurement accuracy: ±1% Sample size: 100*100mm Clamping accuracy : ±1mm Temperature range: 0°C-50°C, ±1°C Dimensions 370mmX330mmX450mm Weight: 19Kg Ambient temperature: 23±2°C Relative humidity: up to 80%, no condensation Power supply: 220V, 50Hz
Introduction: Metal coating thickness gauge DMT-E is suitable for testing the resistance value, uniformity and thickness of various aluminized film and aluminized paper. The test process is short and convenient. The operator only needs to cut the sample of the specified size and place it on the instrument. Measuring position, the instrument can automatically complete the whole experimental process, the test accuracy is high, the process is short, and the metal coating thickness gauge DMT-E is suitable for all aluminized film manufacturers, quality inspection institutions and other units. Test principle: The metal coating of the sample is a piece of metal conductor. The resistance of the metal plating of the sample of the specified length and width is measured according to Ohm's law. The thickness of the metal coating is expressed by the square resistance or the thickness is directly calculated.
