DMD-99 two-wire conductivity transmitter Introduction: DMD-99 two-wire conductivity transmitter is an integrated two-wire instrument that can be used to detect the conductivity of water in drinking water, food and beverage, chemical, boiler water, pharmaceutical, reverse osmosis, pure water and other industries , Economical and practical, easy to install and use Features: 1. Integrated structure, can be displayed on the spot, but also can be transmitted remotely, easy to use, reliable performance. 2. Two-wire instrument, saving cables and other costs. 3. A variety of installation structure types, convenient and flexible installation can meet the different needs of users. 4. The product has good load characteristics, strong anti-interference ability, reverse polarity protection, surge voltage protection and overload protection. Technical Parameters: 1. Measuring range 0 ～ 0.1 ～ 20μS/cm, k=0.01 0 ～ 1 ～ 200μS/cm, k=0.1 0 ～ 10 ～ 2000μS/cm, k=1.0 2. Accuracy: ±2% F.S 3. Drift: ≤ 0.5% F.S / 24 hours 4. Temperature compensation: automatic compensation method 5. Electrode: stainless steel combined electrode: solid structure, can be cleaned repeatedly, the electrode constant is 0.01, 0.1, 1.0 three options 6. Medium temperature: -10 ～ 60℃ (above 60℃ requires special customization) 7. Medium pressure: <0.6MPa (exceeding needs to be customized) 8. Signal output: 4-20mA, loop load 250Ω 9. Ambient temperature: -10 ～ 50℃, 10. Shell protection grade: IP65 11. Power supply: 24VDC (22 ～ 32V)
Introduction: DMD-99 two-wire conductivity transmitter is an integrated two-wire instrument that can be used to detect the conductivity of water in drinking water, food and beverage, chemical, boiler water, pharmaceutical, reverse osmosis, pure water and other industries , Economical and practical, easy to install and use
