DM2100 X-ray fluorescence multi-element analyzer Introduction: The DM2100 X-ray fluorescence multi-element analyzer is an internationally advanced analytical instrument developed and produced by our company. It adopts energy dispersive X-ray fluorescence (EDXRF) analysis technology, thin beryllium window inflatable proportional counter, secondary filter, special optical path system, hard sample proportion method, and our company's proprietary spectral technology, so that small instruments can accurately measure adjacent light elements (such as Al and Si in cement raw materials), and its measurement accuracy reaches the level of imported similar instruments. It meets the relevant requirements of the national standard GB/T 176-2017 "Methods for Chemical Analysis of Cement", industry standard JC/T1085-2008 "X-ray Fluorescence Analyzers for Cement", and industry standard JB/T11145-2011 "X-ray Fluorescence Spectrometers". As long as a tablet is pressed, the concentration of Al2O3, SiO2, SO3, CaO, and Fe2O3 in the material can be measured within 310 seconds. Features: 1. Quick simultaneous analysis - The required measurement elements are analyzed quickly and the concentration results are usually given in a few minutes. 2. High Accuracy - Adopting the domestically pioneered spectral separation technology, it can truly distinguish adjacent elements and accurately measure adjacent light elements. 3. Easy to use - touch screen operation. After the sample is crushed and pressed into the instrument, simply press the [Start] button to truly achieve one click operation. 4. Environmental protection and energy conservation - radiation protection meets exemption requirements. During analysis, there is no contact or damage to the sample, no pollution, no need for chemical reagents, and no need for combustion. 5. Long term stability - Adopting variable gain digital multi-channel, with functions such as gain adjustment, ratio correction, and deviation correction, it has excellent long-term stability. 6. High reliability - Integrated design, high degree of integration, strong environmental adaptability, strong anti-interference ability, and high reliability. 7. Powerful - With pass rate statistics, rate value calculation, error prompts, etc., software functions can also be added according to user requirements. 8. Data storage - can store massive amounts of data, support data retention after power failure, and can be viewed at any time. And it can transfer stored data to a PC. 9. High cost-effectiveness - no gas, vacuum, or dilution required, with extremely low operating and maintenance costs. The price is half that of similar foreign products, which is suitable for China's national conditions. Technical parameters: X-ray tube: voltage: ≤ 10keV, current: ≤ 0.5mA, power: ≤ 5W Detector: Ultra thin beryllium window proportional counter tube Measurement range: Al2O3, SiO2, SO3, CaO, Fe2O3 analysis range can be adjusted and selected through calibration Measurement range width: Al2O3max Al2O3min ≤ 5%, SiO2 max SiO2 min7 ≤%, SO3 max SO3 min ≤ 5%, CaOmax CaOmin ≤ 7%, Fe2O3 max Fe2O3 min ≤ 5%. Measurement accuracy: S Al2O3 ≤ 0.07%, SSiO2 ≤ 0.06%, S SO3 ≤ 0.02%, SCaO ≤ 0.08%, S Fe2O3 ≤ 0.03%. Compliance standards: GB/T 176-2017, JC/T1085-2008, JB/T11145-2011, etc System measurement time: 1-999s, recommended value: 310s Usage conditions: Environmental temperature: 5-40 ℃, relative humidity: ≤ 85% (30 ℃), power supply: 220V ± 20V, 50Hz, ≤ 150W Size and weight: 560mm (W) × 470mm (D) × 150mm (H), 23kg
Introduction: The DM2100 X-ray fluorescence multi-element analyzer is an internationally advanced analytical instrument developed and produced by our company. It adopts energy dispersive X-ray fluorescence (EDXRF) analysis technology, thin beryllium window inflatable proportional counter, secondary filter, special optical path system, hard sample proportion method, and our company's proprietary spectral technology, so that small instruments can accurately measure adjacent light elements (such as Al and Si in cement raw materials), and its measurement accuracy reaches the level of imported similar instruments. It meets the relevant requirements of the national standard GB/T 176-2017 "Methods for Chemical Analysis of Cement", industry standard JC/T1085-2008 "X-ray Fluorescence Analyzers for Cement", and industry standard JB/T11145-2011 "X-ray Fluorescence Spectrometers". As long as a tablet is pressed, the concentration of Al2O3, SiO2, SO3, CaO, and Fe2O3 in the material can be measured within 310 seconds.
