Introduction: DM series strain load pressure sensor is mainly used to measure various external forces such as pressure, tensile force, axial force, load, etc., with the elastic body attached to the strain gauge as the sensitive element, the external power supply, the output is proportional to the external load, and the corresponding Instrument matching can be widely used in automobiles, electronic scales, robots, mechanical equipment, presses, axial load and other occasions where pressure needs to be measured. The load sensors produced by our company have high precision, good reliability, easy installation and stable performance. According to the different structure of the elastomer, it can be divided into pressure sensor, tension pressure sensor and locking force sensor, which can be customized according to customer needs. Sensor principle: DMHZ series load sensor adopts the principle of strain full-bridge circuit, and pastes high-precision full-bridge strain gauge inside the metal elastic body. When the external pressure acts on the sensor, the elastic body is deformed and transmitted to the strain gauge. The corresponding pressure magnitude can be obtained by changing the strain change information collection and processing operations. Technical parameter: Range: 10; 20; 50; 100; 200kg Full output: 1.5±0.2mv/V Comprehensive accuracy: 0.2%FS Bridge resistance: 350Ω Excitation voltage: ≤10VDC Dimensions: diameter 15mm height 22mm Allowable overload: 120%FS Material: Alloy Steel Outlet: side outlet
Introduction: DM series strain load pressure sensor is mainly used to measure various external forces such as pressure, tensile force, axial force, load, etc., with the elastic body attached to the strain gauge as the sensitive element, the external power supply, the output is proportional to the external load, and the corresponding Instrument matching can be widely used in automobiles, electronic scales, robots, mechanical equipment, presses, axial load and other occasions where pressure needs to be measured. The load sensors produced by our company have high precision, good reliability, easy installation and stable performance. According to the different structure of the elastomer, it can be divided into pressure sensor, tension pressure sensor and locking force sensor, which can be customized according to customer needs.
