Introduction: The DM-10 strain-type inclination sensor is suitable for long-term measurement of the horizontal or vertical inclination of hydraulic structures such as concrete dams, face dams, earth-rock dams, etc. It is also suitable for industrial and civil buildings, roads, bridges, tunnels, roadbeds, and civil foundation pits. It can be used to measure the inclination angle of the model test, and it is convenient to realize the automation of the inclination measurement. Strain type principle output, can be connected to DM-YB18 series dynamic and static acquisition instrument, can realize data dynamic measurement, suitable for different tested structural parts (beams, plates, piles, columns, etc.) and the inclination of foundation rigid inclination changes in model tests Angle measurement. technical parameter: Product Name: Strain Type Inclination Sensor Range: ±3°, ±5°, ±10°, ±15° Overload capacity: 120% of rated range (overrange will not be damaged) Full output ( ): -1000~1000 (theory) Bridge resistance ( ): 350 Full Bridge Accuracy: 0.2%FS Dimensions: Diameter 48mm Height 70mm Bridge voltage: ≤10V Accessible equipment: various dynamic and static strain test systems
Introduction: The DM-10 strain-type inclination sensor is suitable for long-term measurement of the horizontal or vertical inclination of hydraulic structures such as concrete dams, face dams, earth-rock dams, etc. It is also suitable for industrial and civil buildings, roads, bridges, tunnels, roadbeds, and civil foundation pits. It can be used to measure the inclination angle of the model test, and it is convenient to realize the automation of the inclination measurement. Strain type principle output, can be connected to DM-YB18 series dynamic and static acquisition instrument, can realize data dynamic measurement, suitable for different tested structural parts (beams, plates, piles, columns, etc.) and the inclination of foundation rigid inclination changes in model tests Angle measurement.
