Introduction: DLSC-Ex explosion-proof temperature monitoring system is a real-time monitoring and monitoring system integrating visible light, infrared thermal imaging and embedded processing technology. The system can automatically inspect the running substation equipment, real-time monitoring, automatic warning and real-time acquisition Equipment fault status of the thermal information, and automatically generate the corresponding temperature change reports, with non-power failure, long distance, safe, reliable, high detection accuracy, online monitoring and equipment maintenance is one of the very effective means. Technical Parameters: Detector type: uncooled focal plane micro-thermal type Pixels: 384 × 288 Viewing angle / minimum focal length: 12 ° × 9 ° / 0.5m Spatial resolution: 0.67mrad Thermal sensitivity: ≤ 0.06 ℃ @ 30 ℃ Frame rate: 50 / 60Hz Focus: Auto / manual focus Wavelength range: 8 ~ 14μm Zoom magnification: 30x optical zoom Image resolution: 1080P Minimum illumination: 0.005 (Lux) Horizontal rotation angle: 0 ° ~ 360 ° continuous rotation Presets: 255 support Bearing and movement range: Top load: -90 ° ~ + 90 ° Temperature range: -20 ℃ ~ + 650 ℃, expandable to 1200 ℃ Accuracy: ± 2 ℃ or ± 2% (reading range), whichever is greater Temperature correction: automatic / manual Measurement mode: arbitrary software settings The original image acquisition: the back-end manual collection of single-frame, 25-frame raw data image, the data collected image analysis, Can measure temperature Image Storage: H.264 network video digital storage, transmission Single photo save, BMP format External power supply: 220AC Power consumption: ≤ 75W (25 ℃ normal working hours) Operating temperature: -40 ℃ ~ +65 ℃ Protection class: Ex d IIC T6 Gb / Ex tD A21 IP66 T80 ℃ Humidity: ≤90% (non-condensing)
Introduction: DLSC-Ex explosion-proof temperature monitoring system is a real-time monitoring and monitoring system integrating visible light, infrared thermal imaging and embedded processing technology. The system can automatically inspect the running substation equipment, real-time monitoring, automatic warning and real-time acquisition Equipment fault status of the thermal information, and automatically generate the corresponding temperature change reports, with non-power failure, long distance, safe, reliable, high detection accuracy, online monitoring and equipment maintenance is one of the very effective means.
