Introduction: Used for the flexural strength test of cement and other non-metallic brittle materials. Products meet the GB/T17671, GB3350, BS4550, ISO679 standards. Technical Parameters: Maximum test force: 1000N for single lever When double lever: 5000N/6000N Accuracy of indication: ±1% Single lever output ratio: 10:1 Double lever output ratio: 50:1 Loading rate (double lever): 50N/s Anti-folding fixture Adding roller and supporting roller diameter: Ф10mm Support roller distance: 100±0.1mm Spacer spacing: 46mm Net weight: ≈85kg Instrument operation: 1, operating room temperature: 20 ± 2 °C, relative humidity> 50%. 2. Turn on the power supply and adjust the zero point (zeroing the counterweight block so that the traveling block is at the “0” position and the main lever is at the level). 3, remove the debris on the fixture, the trial body into the anti-folding fixture, adjust the fixture to clamp the specimen, so that the main lever produces an elevation angle. 4. Start button, read the flexural strength after the specimen is broken. 5. Press the button on the cruiser and push the tour back to the "0" position. 6, keep the instrument clean and dry. There must be no lubricating oil between the blade and the blade to avoid sticking to dust.
Introduction: Used for the flexural strength test of cement and other non-metallic brittle materials. Products meet the GB/T17671, GB3350, BS4550, ISO679 standards.
