Brief introduction: DKHIRT handheld thermometer is a conventional equipment for temperature detection in industrial production process. Beautiful appearance, simple operation, easy to carry. The 2.2-inch color TFT highlighted liquid crystal display, 2200mA super-capacity lithium battery, USB interface charging and data exchange, intuitive and comprehensive user interface, providing a very close user experience. The user interface displays the temperature of Celsius, the temperature of Fahrenheit, the current measured value, the maximum value, the minimum value, the laser aiming state, the emissivity coefficient and the current date and time. In addition to charging, USB interface can also read historical measurement data through USB disk. Data reading does not require special software, can be opened directly through Windows system, convenient and fast. The data storage format is *. Txt. Can be conveniently used by third parties. DKHIRT handheld thermometer USES coaxial laser assisted aiming. As long as the switch is pressed, DKHIRT's optical system will emit a aiming laser beam to assist the user to find the object under test. The position of the aiming laser beam is the measured position of the target object. The high-speed measurement function and the maximum measurement function enable DKHIRT to accurately measure the actual temperature of the target object even if the target position is shaken. DKHIRT handheld thermometer temperature range covering 25-3000 ℃ temperature. Can be widely used in: electric power testing, glass manufacturing, fire safety, metallurgy industry, metal processing, plastic products, energy testing, heat treatment and other industries. Basic parameters: Measured temperature range and response wavelength: DKHIRTL1-25 ~ 500 ℃ 8 to 14 microns (food electricity plastic and below 500 ℃ temperature detection) DKHIRTL2-25 ~ 1250 ℃ 8 to 14 microns (hot working of metal detection) 2-3.1 mu m DKHIRTL3 100 ~ 800 ℃ (lead tin aluminum copper and other non-ferrous metal hot working) DKHIRTH1 200 ~ 1800 ℃, 0.7 to 1.7 microns (forging heating molten steel temperature measuring crystal material heat treatment production chemical refractories production) DKHIRTH2 800 ~ 3000 ℃, 0.4 to 1.1 microns (molten steel temperature measuring tungsten molybdenum materials special high temperature material temperature measurement) Measurement accuracy: + + 1%FS/ + 0.5%FS Repeat accuracy: 0.2% Resolution: 1 ℃ / 0.5 ℃ Response time: <50ms/<5ms Optical parameters: Lens type: silicon/germanium/double glued lens Probe: thermoelectric reactor /InGaAs/SI Measure distance: 0.6m minus infinity Distance coefficient: 160:1, 320:1 Minimum target measurable: 2mm 1.5mm Electrical parameters: Power supply: 7.4VDC (2200mA) lithium battery Analog output: none Digital output: USB Power consumption: < 1.2 W Battery life: 8 hours Auxiliary targeting laser: IEC2 class, FDA class II (< 1mW) Operating parameters and standards: Temperature: < 60 ℃ Relative humidity: 10-95%, with no condensation 25 to 45 ℃ Physical size: 196 x 277 x 61mm Weight: 0.6 kg
Brief introduction: DKHIRT handheld thermometer is a conventional equipment for temperature detection in industrial production process. Beautiful appearance, simple operation, easy to carry. The 2.2-inch color TFT highlighted liquid crystal display, 2200mA super-capacity lithium battery, USB interface charging and data exchange, intuitive and comprehensive user interface, providing a very close user experience. The user interface displays the temperature of Celsius, the temperature of Fahrenheit, the current measured value, the maximum value, the minimum value, the laser aiming state, the emissivity coefficient and the current date and time. In addition to charging, USB interface can also read historical measurement data through USB disk. Data reading does not require special software, can be opened directly through Windows system, convenient and fast. The data storage format is *. Txt. Can be conveniently used by third parties. DKHIRT handheld thermometer USES coaxial laser assisted aiming. As long as the switch is pressed, DKHIRT's optical system will emit a aiming laser beam to assist the user to find the object under test. The position of the aiming laser beam is the measured position of the target object. The high-speed measurement function and the maximum measurement function enable DKHIRT to accurately measure the actual temperature of the target object even if the target position is shaken. DKHIRT handheld thermometer temperature range covering 25-3000 ℃ temperature. Can be widely used in: electric power testing, glass manufacturing, fire safety, metallurgy industry, metal processing, plastic products, energy testing, heat treatment and other industries.
