Introduction: Industrial type---DH-1602B digital microscope computer control National CCC Compulsory Certification Number: 2008010703299560 Features: 1. High-efficiency rotary compressor with a cooling capacity of up to 8200W. 2. Seven rows of copper tube condensation and evaporator, full copper tube and aluminum fin structure, the evaporator uses a hydrophilic membrane to increase the amount of dehumidification. 3. Convenient and simple filter structure, can be cleaned and replaced at any time. 4. Atmospheric, rough appearance, plastic panel, sheet metal shell design. 5. Exquisite LED microcomputer control, free to choose humidity control according to user humidity requirements, three-phase power supply, can be used in industrial power. 6. With Japanese compressor, the dehumidification and input power achieve the best results. 7. Automatic fault diagnosis function, which is convenient for users to troubleshoot and consult for troubleshooting methods. 8. High-efficiency rotary-wing high-volume wind wheel and pure copper ball bearing motor ensure the heat dissipation and service life of the motor are synchronized with the compressor. 9. Standard power wiring, power cords that do not cut corners to ensure safe use of the product. 10. Obtain a certificate such as CCC. Technical Parameters: Model: DH-1602B Voltage / frequency: 380V / 50Hz Input power: 3200 W Refrigerant: R22 Maximum dehumidification capacity: 160L/D About dehumidification area (layer height 2.6m): 160-200 square meters Water storage capacity: direct drainage Compressor: Reciprocating, over and under pressure three minute delay Applicable temperature range: 5 ° C ~ 38 ° C Defrost form: automatic defrost Dimensions: 660 × 510 × 1705 mm Net weight: 110 Kg
