DG-200 dust generator Introduction: The DG-200 dust generator is a device that can provide uniformly concentrated and various particle sizes of aerosols for a long time, ranging from nanometers to micrometers. It is used to provide long-term and stable dust gas for laboratories. Load the powder sample into a glass container and accelerate it through a nozzle at the diffusion head. The airflow will be accelerated to a high speed of 180m/s. The high-speed airflow provides necessary turbulence and shear force for the full dispersion of the powder. The agglomerated particles will eventually be dispersed and output in a smoky effect. characteristic: The diffusion of trace amounts of 0.1-10 μ m powder becomes very effective for valuable and toxic samples It can be used to introduce dust into the particle size analyzer and scatter dry polystyrene latex spheres (PSLs) to calibrate the measuring instrument; The particles collected on the diameter filter membrane for environmental monitoring will be redispersed, etc. Technical parameters: Product Name: DG-200 Dimensions: 343mm x 165mm x 200mm (length x width x height) Weight: Approximately 6.4kg Power Supply: 220V AC, 50/60Hz Compressed gas: internal air compressor Particle size range: 0.1～10μm Mass flow range: fine adjustment 200mg/h -20g/h, fully open mode 20-100g/h Volume flow range: Dust flow rate 0-14L/min in fine adjustment mode
Introduction: The DG-200 dust generator is a device that can provide uniformly concentrated and various particle sizes of aerosols for a long time, ranging from nanometers to micrometers. It is used to provide long-term and stable dust gas for laboratories. Load the powder sample into a glass container and accelerate it through a nozzle at the diffusion head. The airflow will be accelerated to a high speed of 180m/s. The high-speed airflow provides necessary turbulence and shear force for the full dispersion of the powder. The agglomerated particles will eventually be dispersed and output in a smoky effect.
