DDJ-100KV5 voltage breakdown tester Introduction: Mainly suitable for testing the breakdown strength and withstand voltage of solid insulation materials (such as plastic, rubber, laminated materials, thin films, resins, mica, ceramics, glass, insulation paint, and other insulation materials and components) under power frequency voltage or DC voltage. Technical parameters: Electrical capacity: 5KVA Output voltage: AC/DC-100KV Input voltage: AC-220V/50HZ Boost rate: 0.1KV/s-5KV/s can be manually set Boosting method: constant speed boosting/gradient boosting/withstand voltage test Breakdown judgment: voltage judgment/current judgment Test medium: air test/oil bath test/high temperature test as optional Data collection: photoelectric isolation line with strong anti-interference ability Voltage accuracy: ≤ 1.5% Leakage current: 0-100mA sensor range Voltage sensor: 0-100V sensor range Electrode specification: Sheet electrode: φ 25mm-2 pieces, φ 75mm-1 customizable electrodes according to requirements Test discharge: electric automatic discharge Electrode lifting: manual placement/automatic lifting Automatic lifting is optional Test oil tank: length, width, height -300mm * 150mm * 200mm. There is a suspension frame inside the tank, making it easy to replace the sample Test lighting: built-in lighting Test exhaust: built-in exhaust fan Test indication: Multi color tower light for host integration test, indicating test status Test door: Pneumatic rod test door/sliding door sliding door is dedicated to automatic electrode lifting Safety protection: overvoltage protection/overcurrent protection/short circuit protection/leakage protection Working environment: room temperature, humidity ≤ 65% Host size: length, width, height -1500mm * 850mm * 1700mm Test space size: length, width, height -750mm * 600mm * 800mm Test door observation window: Glass door size - length and width 550mm * 600mm, large window for easy observation Equipment weight: approximately 250KG
Introduction: Mainly suitable for testing the breakdown strength and withstand voltage of solid insulation materials (such as plastic, rubber, laminated materials, thin films, resins, mica, ceramics, glass, insulation paint, and other insulation materials and components) under power frequency voltage or DC voltage.
