DD5 automatic capping medical centrifuge Introduction:
This product is specially designed for hospitals, blood stations, radiology, nuclear medicine and other units. It is designed to automatically remove the cap and centrifuge once. It completely solves the problem of the hospital taking off the cap in the vacuum tube. It is novel, advanced and efficient. Separate the device.
The automatic capping centrifuge belongs to the conventional medical centrifuge, and the automatic capping centrifuge is also called the automatic capping centrifuge. It is a centrifugal machine for the routine hospital inspection department which automatically removes the cover of the vacuum blood collection tube during the centrifugation process. Designed for hospitals, blood stations, radiology, nuclear medicine and other units, it is automatically completed once the cap is centrifuged, which completely solves the problem of low efficiency of artificial capping during the process of separating vacuum blood collection tubes and vibration caused by extubation. Increase the risk of bacterial infections.
There are 48, 76, 128, 148 four specifications to meet different separation needs; there are two models of normal temperature and freezing, to meet the experimental needs.
Feature:
1. The vacuum blood collection tube automatically removes the centrifuge, and the success rate of the capping is 97%. It is suitable for vacuum blood collection tubes of 75mm/100mm.
2. It adopts Yingruen company single-chip microcomputer and Infineon drive module, cooperates with independent research and development control board and large torque AC/DC inverter motor, which has stable operation and low noise, and provides a comfortable laboratory environment.
3. Imported fluorine-free refrigeration compressor unit and environmentally friendly refrigerant R404a, with wide temperature control range: -20 °C 40 °C, and can be set during the operation of the centrifuge; with pre-cooling function, can quickly cool down to the set temperature; It has a standby cooling function to maintain the set temperature in the standby state; it has a heating and defrosting function. (only for TL5R)
4. It has various early warning functions such as overspeed, over temperature, unbalance, under pressure and overpressure, three-stage damping and shock absorption, special combination damping device, which makes the motor run safely and reliably, prevent blood from resuscending, and achieve excellent centrifugal effect. .
5. TFT-LCD true color display, touch screen button and physical button dual operation mode, with special button for centrifugal force display, display setting parameters and running parameters at the same time, parameters can be changed at any time during operation, no need to stop, the operation interface is intuitive, Simple and easy to use; the operation menu is available in multiple languages (Chinese, English, Russian, Portuguese).
6. Rear austenitic 304 stainless steel centrifugal chamber with all-steel sprayed plastic shell, one-piece stamped steel front face and three-layer steel protective cover, etc., which are both durable and durable, ensuring the safety of workers and laboratories. .
7. Automatically uncover the medical centrifuge DD5, adopting the silent electromechanical integrated motor door lock, easy to use, just lightly close the door cover, it will trigger the door lock system and lock the door cover safely.
8.10 speed acceleration and 10 speed reduction rate control, can store 20 sets of user-defined programs, can modify the control parameters of the running rotor at any time, can display the speed rising curve, centrifugal integral curve, temperature curve.
9. The chassis has casters and caster adjustment blocks to facilitate equipment movement and horizontal adjustment (only for DD5M/TL5R); 100V-230V wide voltage design to increase the range of the centrifuge's voltage (only for TD5/DD5).
10. Automatically uncapped medical centrifuge DD5, with CFDA filing and CFDA production qualification, passed ISO 9001 (2015) certification and ISO 13485 (2016) certification.
Technical Parameters:
Host technical parameters
Product model: DD5 (capper centrifuge)
Number of blood collection tubes separated: 48 pieces / 76 pieces
Maximum speed (r/min): 4000 r/min
Maximum centrifugal force (×g): 3080×g
Speed accuracy: ±50r/min
Control and drive system: High torque straight / AC variable frequency motor, microcomputer control
Run the program: 20
Timing range: 1-99h59min
Power supply: AC220V 50Hz
Noise: ≤60 dB
Total power: 800 w
Dimensions (length × width × height): 630 × 500 × 420 mm
Weight: 50 Kg
Introduction:
This product is specially designed for hospitals, blood stations, radiology, nuclear medicine and other units. It is designed to automatically remove the cap and centrifuge once. It completely solves the problem of the hospital taking off the cap in the vacuum tube. It is novel, advanced and efficient. Separate the device.
The automatic capping centrifuge belongs to the conventional medical centrifuge, and the automatic capping centrifuge is also called the automatic capping centrifuge. It is a centrifugal machine for the routine hospital inspection department which automatically removes the cover of the vacuum blood collection tube during the centrifugation process. Designed for hospitals, blood stations, radiology, nuclear medicine and other units, it is automatically completed once the cap is centrifuged, which completely solves the problem of low efficiency of artificial capping during the process of separating vacuum blood collection tubes and vibration caused by extubation. Increase the risk of bacterial infections.
There are 48, 76, 128, 148 four specifications to meet different separation needs; there are two models of normal temperature and freezing, to meet the experimental needs.
