Introduction: Because at a standard atmospheric pressure and without any impurities in the water, the condition that the water reaches the boiling point is that the water is heated to 0 degrees Celsius by the water bath method, but it is necessary to absorb higher heat from the liquid state to the gaseous state. In the water bath method, the water in the beaker can only have a temperature of 100 degrees Celsius before it becomes steam, and it cannot provide more heat to the water in the test tube, so the liquid in the test tube cannot be boiled. Therefore, it is often necessary to use a water temperature bath to heat some reactions that require constant temperature heating. The double-row four-hole water bath can be used by the testing departments of medical institutions, colleges, scientific research, chemical industry, printing and dyeing industries for distillation, drying, concentration and constant temperature heating of chemicals and biological products. DC-0515 low temperature water tank is widely used in petroleum, chemical, electronic instrumentation, physics, chemistry, bioengineering, medical and health, life science, light industry food, physical property testing and chemical analysis research departments, colleges and universities, enterprise quality inspection and production. The department provides a hot and cold controlled, uniform temperature field source for the user's work, constant temperature test or test on the test sample or the produced product, or as a heat source or cold for direct heating or cooling and auxiliary heating or cooling. source Low temperature constant temperature water tank Technical Parameters: Temperature range: -5 to 100 ° C Temperature fluctuation: ≤±0.5°C Temperature uniformity: ≤ ± 0.1 ° C Temperature resolution: 0.1 ° C Pump flow: >8L/min Studio size: 250 × 220 × 200mm Stainless steel liner, sprayed steel shell, Intelligent instrument PID control, digital display, high temperature control accuracy, built-in deviation adjustment The heating device uses a closed heater, which has low heat loss. Heating power: 500W The low temperature constant temperature water tank has a built-in concealed coil for quick cooling
Introduction: Because at a standard atmospheric pressure and without any impurities in the water, the condition that the water reaches the boiling point is that the water is heated to 0 degrees Celsius by the water bath method, but it is necessary to absorb higher heat from the liquid state to the gaseous state. In the water bath method, the water in the beaker can only have a temperature of 100 degrees Celsius before it becomes steam, and it cannot provide more heat to the water in the test tube, so the liquid in the test tube cannot be boiled. Therefore, it is often necessary to use a water temperature bath to heat some reactions that require constant temperature heating. The double-row four-hole water bath can be used by the testing departments of medical institutions, colleges, scientific research, chemical industry, printing and dyeing industries for distillation, drying, concentration and constant temperature heating of chemicals and biological products. DC-0515 low temperature water tank is widely used in petroleum, chemical, electronic instrumentation, physics, chemistry, bioengineering, medical and health, life science, light industry food, physical property testing and chemical analysis research departments, colleges and universities, enterprise quality inspection and production. The department provides a hot and cold controlled, uniform temperature field source for the user's work, constant temperature test or test on the test sample or the produced product, or as a heat source or cold for direct heating or cooling and auxiliary heating or cooling. source Low temperature constant temperature water tank
