Introduction: The CZF-6 cement component analyzer is suitable for the GB/T12960-1996 "Quantitative Determination of Cement Components" standard. It can quantitatively determine the content of pozzolanic mixed materials, fly ash and slag components in cement. Suitable for Portland cement, slag Portland cement, ordinary Portland cement, etc. Technical Parameters: Temperature control range: 0-60℃ adjustable Constant temperature accuracy: 10-20±0.5℃ Timing range: 0-100min Temperature control system: electronic refrigeration Alarm when reaching the set temperature Power supply: 220V 50HZ 300W Instructions: To determine the content of pozzolanic mixed materials and fly ash components, the allowable error of the same laboratory is 0.8%, and the allowable error of different laboratories is 1.0%. For the determination of the content of slag components, the allowable error of the same laboratory is 1.0% , The allowable error of different laboratories is 1.2%. After the power is turned on, the machine enters the standby state. In the standby state, the operator can set test parameters such as constant temperature, timing time, etc., and the test operation can be performed after the parameters are set.
Introduction: The CZF-6 cement component analyzer is suitable for the GB/T12960-1996 "Quantitative Determination of Cement Components" standard. It can quantitatively determine the content of pozzolanic mixed materials, fly ash and slag components in cement. Suitable for Portland cement, slag Portland cement, ordinary Portland cement, etc.
