Introduction:
CYD-3000 portable magnetic particle inspection machine series is the application of the latest research results of universal SCR trigger equipped with a new magnetic particle inspection machine. Instrument can exchange the magnetization of the workpiece and automatic demagnetization. AC magnetization phase power phase controller, residual magnetic stability, to ensure the quality of testing: Demagnetization using automatic attenuation method, from the set magnetizing current value gradually decreased to zero, good demagnetization effect. Instrument equipped with pole exploration, but also outside with low-voltage magnetization coil, to achieve a multi-purpose machine. The whole design is reasonable, compact structure, small size, light weight. Instrument can be used in a fixed place, more suitable for on-site operations.
CYD-3000 AC mobile magnetic particle inspection machine is a mobile multi-purpose magnetic particle inspection equipment, the workpiece can be detected magnetization and automatic demagnetization; can be used as a continuous magnetic particle inspection and residual magnetic particle inspection; can be fixed in the workshop or laboratory Use, can also be used to bring flaw detection. With accessories can make a variety of parts of the shaped parts of the appropriate magnetization, large parts can be segmented magnetization.
The car-type flaw detector with AC magnetization phase power phase control, residual magnetic stability, to ensure the quality of testing; automatic demagnetization magnetizing current value can be automatically used to decay to zero, so that the residual magnetism disappears. Easy to operate, the effect is good. The instrument adjusts the size of SCR conduction angle to adjust the output current value, to achieve non-contact adjustment of high current and improve the service life of the instrument. Technical Parameters:
1, the exchange of magnetizing current: peak 0 ~ 3000A, the effective value of 0 ~ 2100A, continuously adjustable, short-term intermittent electricity, with power phase control;
2, automatic demagnetization current: peak 3000A ~ 0, the effective value of 2100A ~ 0 continuously adjustable, demagnetization time <5s, with the current decreases and shortened;
3, the output load: 2 × 95mm2 copper core cable 2.5m;
4, power supply: 380V (two-phase three-wire) ± 10%, 50Hz, the maximum instantaneous current of about 60A; Note: 3 × 6mm2 power input line, black for the ground wire, the other two 380V phase.
5, Dimensions: 350 (W) × 600 (H) × 640 (D) mm; (without handle);
6, Residual magnetic stability: no more than ± 5%;
7, weight: about 110 kg.
Introduction:
CYD-3000 portable magnetic particle inspection machine series is the application of the latest research results of universal SCR trigger equipped with a new magnetic particle inspection machine. Instrument can exchange the magnetization of the workpiece and automatic demagnetization. AC magnetization phase power phase controller, residual magnetic stability, to ensure the quality of testing: Demagnetization using automatic attenuation method, from the set magnetizing current value gradually decreased to zero, good demagnetization effect. Instrument equipped with pole exploration, but also outside with low-voltage magnetization coil, to achieve a multi-purpose machine. The whole design is reasonable, compact structure, small size, light weight. Instrument can be used in a fixed place, more suitable for on-site operations.
CYD-3000 AC mobile magnetic particle inspection machine is a mobile multi-purpose magnetic particle inspection equipment, the workpiece can be detected magnetization and automatic demagnetization; can be used as a continuous magnetic particle inspection and residual magnetic particle inspection; can be fixed in the workshop or laboratory Use, can also be used to bring flaw detection. With accessories can make a variety of parts of the shaped parts of the appropriate magnetization, large parts can be segmented magnetization.
The car-type flaw detector with AC magnetization phase power phase control, residual magnetic stability, to ensure the quality of testing; automatic demagnetization magnetizing current value can be automatically used to decay to zero, so that the residual magnetism disappears. Easy to operate, the effect is good. The instrument adjusts the size of SCR conduction angle to adjust the output current value, to achieve non-contact adjustment of high current and improve the service life of the instrument.
