Introduction: Compared with the traditional laser, the fiber laser can improve the conversion efficiency of the pump light per watt. Compared with the conventional laser, the fiber laser can increase the conversion efficiency of the pump light per watt by more than 10 times, and the automatic design of low energy consumption is suitable. Laboratory or outdoor operation. Compact, stand-alone, ready to use, and directly embedded on the user's device. This continuously tunable single mode 300W-1080nm fiber laser is an industrial grade product specifically designed for 2D cutting, 3D cutting, laser drilling, and 3D printing. It adopts water-cooled and compact structure design, its electro-optic conversion efficiency is higher than 35%, and it is maintenance-free, which is cost-effective and far superior to other types of lasers of the same power. It adopts the international standard optical fiber QBH output head, the international standard RS232 serial port control, and the Chinese and English dual language switching, which is excellent for adapting to the international and domestic markets. Features: 1. Extremely high power stability (power fluctuation <0.4%) 2. Excellent beam quality: M2<1.2 3. Electro-optic conversion efficiency >35% 4. Low cost compact structure 5. Long service life (>100000h), maintenance free Technical Parameters: Working mode : CW Polarization state : Random Center wavelength nm: 1077-1083 Full height half width spectrum width: <3nm Rated maximum output power W: 300 Power adjustment range %: 10~100 Power stability (>24 hours) %: <0.4 Beam quality: <1.2 Input voltage VAC: 220 Maximum modulation frequency KHz: 50 Chassis size mm: 619*490*172 Waveform rise/fall time us: 5 Cooling method : Water Output cable length m: 8~15 or Customer settings Laser output head: QBH Working environment temperature: +5~+40 Cooling water temperature: +18~+28 Storage temperature : -20~+60 Maximum power consumption W: 1200
Introduction: Compared with the traditional laser, the fiber laser can improve the conversion efficiency of the pump light per watt. Compared with the conventional laser, the fiber laser can increase the conversion efficiency of the pump light per watt by more than 10 times, and the automatic design of low energy consumption is suitable. Laboratory or outdoor operation. Compact, stand-alone, ready to use, and directly embedded on the user's device. This continuously tunable single mode 300W-1080nm fiber laser is an industrial grade product specifically designed for 2D cutting, 3D cutting, laser drilling, and 3D printing. It adopts water-cooled and compact structure design, its electro-optic conversion efficiency is higher than 35%, and it is maintenance-free, which is cost-effective and far superior to other types of lasers of the same power. It adopts the international standard optical fiber QBH output head, the international standard RS232 serial port control, and the Chinese and English dual language switching, which is excellent for adapting to the international and domestic markets.
