CWFL-200 single mode continuous fiber laser Introduction:
Compared with traditional lasers, fiber lasers can increase the conversion efficiency of pump light per watt by more than 10 times. The automatic design of low energy consumption is suitable for laboratory or outdoor operation. Compact, stand-alone, ready to use, and directly embedded on the user's device. This continuous modulating single-mode 200W-1080nm fiber laser is an industrial grade product specifically designed for 2D cutting, 3D cutting, laser drilling, and 3D printing.
With air-cooled, compact structure design, its electro-optic conversion efficiency is higher than 35%, and maintenance-free operation, cost-effective, far superior to other types of lasers of the same power. It adopts the international standard optical fiber QBH output head, the international standard RS232 serial port control, and the Chinese and English dual language switching, which is excellent for adapting to the international and domestic markets. Features:
1. Extremely high power stability (power fluctuation <0.4%)
2. Excellent beam quality: M2<1.2
3. Electro-optic conversion efficiency >35%
4. Low cost compact structure
5. Long service life (>100000h), maintenance-free. Technical Parameters:
Operation Mode CW
Polarization Random
Central Wave length nm 1077-1083
Spectral Width FWHM <3nm
Rated Max Output Power W 200
Power Tuning Range % 10~100
Power Stability(>24h) % <0.4
Beam Quality <1.2
Operation Voltage VAC 220
Max Modulation Freq KHz 50
Dimension（L*W*H） mm 637*490*222
Rise/Fall Time us 5
Cooling Method Air
Delivery Cable Length m 8～15 or Customer Specified
Delivery Head RQB
Operation Tem +5~+40
Storage Tem -20~+60
Max Power Consumption W 1000
Introduction:
Compared with traditional lasers, fiber lasers can increase the conversion efficiency of pump light per watt by more than 10 times. The automatic design of low energy consumption is suitable for laboratory or outdoor operation. Compact, stand-alone, ready to use, and directly embedded on the user's device. This continuous modulating single-mode 200W-1080nm fiber laser is an industrial grade product specifically designed for 2D cutting, 3D cutting, laser drilling, and 3D printing.
With air-cooled, compact structure design, its electro-optic conversion efficiency is higher than 35%, and maintenance-free operation, cost-effective, far superior to other types of lasers of the same power. It adopts the international standard optical fiber QBH output head, the international standard RS232 serial port control, and the Chinese and English dual language switching, which is excellent for adapting to the international and domestic markets.
